Locations
Tsubaki®
TSBSB05
Tsubaki® TSBSB05 All-In One Electronic Shock Relay, 0.5 to 6 A, 1NC-1NO Contact, 24 to 240 VAC/VDC V Coil
- Item#: TSBSB05
- Mfr#: TSBSB05
- UPC: 097039703019
- Output relay is self-holding type
- Contacts open when an overload is detected and remain until the reset button is pushed
- Fail-safe relay de-energizes when over current detected
- Economically priced
- Wide current setting range
- High degree of repeatability with low hysteresis
- Includes test and reset buttons
- All-in-one unit with built-in current transformer
- Can be used with single-phased motors
- Permits trip notification by alarm or warning lights
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
TSBSB shock relay series-overload protection has built-in reset button, test button, fail-safe contacts with manual and automatic reset feature. TSBSB shock relay senses the problem before downtime, maintenance and equipment damage occur, saving you time and money. Install it on a line, set the overload parameters and shock relay takes care of the rest. If an overload is detected, the shock relay can send a warning or shut down the line-quick and reliably. Correct the problem and you're up and running again in minutes.
Tsubaki® Shock Relay, All-In One Electronic, Series: TSBSB, 0.5 to 6 A, 2 W Power, 50/60 Hz Frequency, 24 to 240 VAC/VDC Coil, 1NC-1NO Contact Form, 250 VAC Contact, 35 mm DIN Rail Mounting, IP20 Enclosure, -4 to 140 deg F, 3.04 in L x 2.2 in W x 2.63 in H Dimensions
SPECIFICATIONS
| Contact Rating | : | 250 VAC |
| Dimensions | : | 3.04 in L x 2.2 in W x 2.63 in H |
| Enclosure Type | : | IP20 |
| Frequency Rating | : | 50/60 Hz |
| Mounting Type | : | 35 mm DIN Rail |
| Series | : | TSBSB |
| Temperature Rating | : | -4 to 140 deg F |
| Type | : | All-In One Electronic |
| Amperage Rating | : | 0.5 to 6 A |
| Contact Form | : | 1NC-1NO |
| Coil Voltage | : | 24 to 240 VAC/VDC |
