piwik image

Call Us: 800-580-5588

MENU

Products

Contact

Locations

Resources

Services

About

Purvis Industries

Filter Results By

Search within these results

Category
  • Adjustable Wrenches
  • Air Gun Accessories
  • Automotive Specialty Tools
  • Axes, Hatchets & Splitting Wedges
  • Ball Pein Hammers
  • Box End Wrenches
  • Cable & Wire Cutters
  • Cable Strippers
  • Cable Tie Tools
  • Centering & Marking Punches
  • Chain Tools
  • Chisels
  • Claw/Rip/Framing Hammers
  • Combination Pliers
  • Combination Wrenches
  • Crimping Tool Dies
  • Crowfoot Wrenches
  • Diagonal Cutting Pliers
  • Dial Torque Wrenches
  • Electronic Torque Wrenches
  • Engineer/Drilling/Blacksmith Hammers
  • Fastener Setting Tools
  • Flange & Set-Up Wedges
  • Flare Nut Wrenches
  • General Purpose Hand Tools
  • General Purpose Power Tools
  • Grinder & Sander Parts
  • Hacksaw & Hand Saw Blades
  • Hacksaws
  • Hammer Sets
  • Hammers & Striking Tools
  • Hand Impact Drivers
  • Hand Scrapers
  • Hand Tool Kits
  • Hex & Torx Key Sets
  • Hex & Torx Keys
  • Hex Key Stands
  • Hole Punches
  • Hooks & Picks
  • Hose Crimpers
  • Hydraulic Tool Accessories
  • Knife Accessories
  • Long Nose & Needle Nose Pliers
  • Magnetic Pickups
  • Mallets & Dead Blow Hammers
  • Micrometer Torque Wrenches
  • Nail Pullers, Wrecking & Pry Bars
  • Offset Pipe Wrenches
  • Open End Wrenches
  • Picks & Riveting/Chipping Hammers
  • Pin Installation & Removal Punches
  • Pipe & Tubing Cutter Accessories
  • Pipe & Tubing Cutters
  • Pipe Repair Kits
  • Pipe Wrench Parts
  • Pipe Wrenches
  • Plier Accessories
  • Pliers
  • Pliers Sets
  • Pry Bar Sets
  • Prying Tools
  • Punch & Chisel Parts
  • Punch & Chisel Sets
  • Punches, Chisels & Engravers
  • Ratcheting Socket Wrench Parts
  • Ratcheting Socket Wrench Sets
  • Ratcheting Socket Wrenches
  • Replacement Hammer & Axe Handles
  • Replacement Hammer Faces
  • Retaining & Lock Ring Pliers
  • Roller Chain Pullers
  • Scraper & Spreader Sets
  • Screwdriver Sets
  • Screwdrivers & Nutdrivers
  • Service/Pump Wrenches
  • Sledgehammers
  • Slip Joint Pliers
  • Socket Adapters & Universal Joints
  • Socket Breaker Bars
  • Socket Driver Bit Sets
  • Socket Driver Bits
  • Socket End Wrenches
  • Socket Extensions
  • Socket Handles
  • Socket Pins & Rings
  • Socket Sets
  • Socket Storage
  • Sockets
  • Sockets & Bits
  • Spanner Wrenches
  • Specialty Tools
  • Standard Screwdrivers
  • Straight Pipe Wrenches
  • Strap & Chain Wrenches
  • Strap Wrenches
  • Striking & Slugging Wrenches
  • Tongue & Groove Pliers
  • Tool Bags & Totes
  • Tool Pouches & Holsters
  • Tools
  • Torque Screwdrivers
  • Utility Knives
  • Wrench Parts
  • Wrench Sets
  • Wrenches
Brands
  • ALLEN
  • AMPCO SAFETY TOOLS
  • ANCHOR BRAND
  • ANSELL
  • AO SAFETY
  • APEX CAMPBELL
  • APEX CRESCENT
  • APEX NICHOLSON
  • APEX PLUMB
  • APEX WISS
  • Aeroquip
  • BEST WELDS
  • BRADY
  • Bahco®
  • C.S. OSBORNE
  • CDI Torque Products®
  • CHAPIN
  • CLC CUSTOM LEATHER CRAFT
  • CLOROX
  • COILHOSE PNEUMATICS
  • DEWALT
  • DIXON GRAPHITE
  • DIXON TICONDEROGA
  • DURACELL
  • DUTTON-LAINSON
  • Dixon®
  • Dodge®
  • EAGLE
  • EAR
  • EKLIND TOOL
  • EMPIRE LEVEL
  • ERGODYNE
  • ESTWING
  • FALK®
  • GARDNER BENDER
  • GC FULLER
  • GENERAL TOOLS
  • GOJO
  • GOSS
  • H. D. HUDSON
  • HEAT STAR
  • HONEYWELL
  • INGERSOLL-RAND
  • IRWIN
  • IRWIN HANSON
  • IRWIN STRAIT-LINE
  • IRWIN VISE-GRIP
  • ITW PRO BRANDS
  • ITW PROFESSIONAL BRANDS
  • J-B WELD
  • J.W. HARRIS
  • JACKSON PROFESSIONAL TOOLS
  • JACKSON SAFETY
  • JET
  • Joe's Hand Cleaner
  • KEEPER
  • KIMBERLY-CLARK PROFESSIONAL
  • KLEIN TOOLS
  • KNIPEX
  • L.S. STARRETT
  • LENOX
  • LIFTEX
  • LINZER
  • Laclede
  • Loctite®
  • MAGNOLIA BRUSH
  • MARKAL
  • MAYHEW TOOLS
  • MILWAUKEE ELECTRIC TOOLS
  • Martin
  • Morse®
  • NORTH SAFETY
  • NORTON
  • NUPLA
  • OTC®
  • Oilfield Products
  • PEERLESS
  • PERMATEX
  • PLEWS
  • PROTO
  • RECTORSEAL
  • RED DEVIL
  • RED DRAGON
  • RIDGID
  • SIOUX FORCE TOOLS
  • SKF®
  • SMC®
  • SOUTHWIRE
  • STANLEY
  • SWANSON TOOLS
  • Snap Rings
  • Timken®
  • Tsubaki®
  • UNION TOOLS
  • VIBCO
  • VICTOR
  • WILTON
  • WRIGHT TOOL
  • WYPO
  • Williams®
Manufacturer
  • Danfoss
  • Dixon Valve & Coupling
  • Fenner Drives
  • Henkel
  • ITW Pro Brands
  • Kleen Products
  • Laclede Chain Manufacturing
  • Martin Sprocket & Gear
  • Purvis Industries
  • RBC Bearings Incorporated
  • Regal Rexnord
  • Robert Bosch
  • SKF
  • SMC Corporation of America
  • Timken
  • U.S. Tsubaki Power Transmission
  • VIBCO
  • Williams
Accuracy
  • +/-6 %
Bit Length
  • 3/8 in
  • 0.59 in
  • 21/32 in
  • 0.77 in
  • 27/32 in
  • 0.89 in
  • 15/16 in
  • 1 in
  • 1.59 in
  • 1.81 in
  • 2.12 in
  • 2-1/2 in
  • 41 mm
  • 42.4 mm
  • 45.3 mm
  • 45.5 mm
  • 54.5 mm
  • 62.7 mm
Bit Size
  • 1/8 in
  • 5/32 in
  • 3/16 in
  • 7/32 in
  • 1/4 in
  • 5/16 in
  • 3/8 in
  • 7/16 in
  • 1/2 in
  • 9/16 in
  • 5/8 in
  • 3/4 in
  • 4 mm
  • 5 mm
  • 6 mm
  • 7 mm
  • 8 mm
  • 9 mm
  • 10 mm
  • 12 mm
  • 14 mm
  • 17 mm
  • 19 mm
  • T10
  • T15
  • T20
  • T25
  • T27
  • T30
  • T40
  • T45
  • T50
  • T55
Blade Length
  • 6 in
  • 9 in
  • 10 in
  • 22 in
  • 30 in
Blade Material
  • Alloy Steel
  • Carbon Steel
  • Steel
Blade Type
  • Hardened/Tempered
Blade Width
  • 1 in
Body Material
  • Alloy Steel
  • Chrome Vanadium Steel
  • Drop Forged Steel
  • Steel
  • Vanadium Steel
Box End Thickness
  • 5/8 in
  • 23/32 in
  • 3/4 in
  • 27/32 in
  • 7/8 in
  • 15/16 in
  • 61/64 in
  • 63/64 in
  • 1-1/16 in
  • 1-3/16 in
  • 1-7/32 in
  • 1-1/4 in
  • 1-5/16 in
  • 1-7/16 in
  • 1-17/32 in
  • 1-5/8 in
  • 1-23/32 in
  • 1-7/8 in
  • 2 in
  • 2-3/8 in
  • 2-7/8 in
  • 3 in
Cable Size
  • 22 to 10 AWG
Cable/Wire Size
  • 1-3/16 in Aluminum/Copper, 1/4 in Messenger Wire
Capacity
  • 3/4 to 2 in
  • 1 in
  • 1-1/4 in
  • 1-1/4 to 3 in
  • 1-1/2 in
  • 1-3/4 in
  • 1-7/8 to 2 in
  • 1-15/16 to 2 in
  • 2 in
  • 2 to 4-3/4 in
  • 2-3/16 in, 2-1/4 in
  • 2-3/16 to 2-1/4 in
  • 2-1/4 in
  • 2-3/8 to 2-1/2 in
  • 2-7/16 in, 2-1/2 in
  • 2-1/2 in
  • 2-11/16 in, 2-3/4 in/2-15/16 in, 3 in
  • 2-11/16 to 3 in
  • 2-3/4 in
  • 3 in
  • 3-3/16 in, 3-1/4 in/3-7/16 in, 3-1/2 in
  • 3-3/16 to 3-1/2 in
  • 3-1/4 in
  • 3-1/2 in
  • 3-11/16 in, 3-3/4 in/3-15/16 in, 3-3/16 in, 4 in
  • 3-11/16 to 4 in
  • 3-3/4 in
  • 4 in
  • 4-7/16 in, 4-1/2 in
  • 4-7/16 to 4-1/2 in
  • 4-1/2 to 6-1/4 in
  • 4-15/16 in, 5 in
  • 4-15/16 to 5 in
  • 5 in
  • 5-7/16 to 5-1/2 in
  • 6 in
  • 6-1/8 to 8-3/4 in
Color
  • Blue
Container Type
  • Clip Rail
  • Metal Tool Box
  • Rugged Case
Drive Size
  • 1/4 in
  • 3/8 in
  • 1/2 in
  • 3/4 in
  • 1 in
  • 1-1/2 in
Drive Type
  • 3/4 in
  • Female x Male
  • Hex/Square
  • Impact/Power
  • Rigid
  • Square
Drivers Included
  • 5-1/4 in Pear Head Ratchet, 1-1/2 in Extension, 6 in Extension, Spinner Handle, Universal Joint
Face Type
  • Double
  • Flat/Round
  • Round
Female Drive Size
  • 1/4 in
  • 3/8 in
  • 1/2 in
  • 3/4 in
  • 1 in
  • 1-1/2 in
Finish
  • Black
  • Black Oxide
  • Chrome
  • Chrome Plated
  • Chrome/Industrial Black
  • Cobalt/Industrial Black
  • High Polished Chrome
  • Industrial Black
  • Natural Mill
  • Nickel Plated
  • Nickel Plated/Polished Chrome
  • Polished Chrome
  • Polished Chrome/Black Oxide Tipped
  • Satin Chrome
  • Satin/High Polished Chrome
  • Satin/Polished Chrome
  • Zinc Plated
Finish/Coating
  • Black
  • Black Oxide
  • Black Phosphate
  • Epoxy Painted
  • Industrial Black
  • Plated
  • Polished Chrome
  • Satin Chrome
  • Satin Chrome Plated
  • Zinc Plated
For Max Wire Thickness
  • 2.5 mm, 2 mm
Graduations
  • 0.1 ft-lb
  • 0.5 ft-lb
  • 1 ft-lb
  • 2 ft-lb
  • 5 ft-lb
  • 10 ft-lb
Hammer Weight Range
  • 16 to 20 oz
Handle Material
  • Alloy Steel
  • Aluminum
  • Bi-Material
  • Cast Iron
  • Fiberglass
  • Hickory Wood
  • Iron
  • Wood
Handle Type
  • Comfortable Grip
Head Material
  • Alloy Steel
  • Brass
  • Carbon Steel
  • Forged Alloy Carbon Steel
  • Forged Alloy Steel
  • Forged Carbon Steel
  • Polymer
  • Steel
Head Shape
  • Pear
  • Round
Head Type
  • Angled
  • Angled/Double
  • Angled/Single
  • Box End
  • Box Single End
  • Fixed
  • Flexible
  • Flexible/Ratcheting
  • Open End
  • Single
Head Weight
  • 1 lb
  • 1.25 lb
  • 1.5 lb
  • 2 lb
  • 2 oz
  • 2.2 lb
  • 2.5 lb
  • 2.9 lb
  • 3 lb
  • 4 lb
  • 4 oz
  • 4 oz oz
  • 6 lb
  • 8 lb
  • 8 oz
  • 8 oz oz
  • 10 lb
  • 12 lb
  • 12 oz
  • 12 oz oz
  • 16 oz
  • 16 oz oz
  • 20 lb
  • 24 oz
  • 32 oz
Hex Size
  • 1/8 in
Impact Rated
  • Yes
Included Socket Size
  • 3/16 in
  • 3/16 in, 7/32 in, 1/4 in, 9/32 in, 5/16 in, 11/32 in, 3/8 in, 7/16 in, 1/2 in, 9/16 in, 4 mm, 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm
  • 1/4 in
  • 3/8 in
  • 1/2 in
  • 7/8 in
  • 1 in
  • 4 mm
  • 10 mm
  • 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 23 mm, 24 mm, 25 mm, 26 mm, 27 mm, 29 mm, 30 mm, 32 mm, 34 mm, 36 mm
Jaw Length
  • 1.781 in
  • 2-5/8 in
  • 110 mm
  • 155 mm
  • 176 mm
Jaw Material
  • Alloy Steel
Jaw Surface
  • Serrated
Jaw Surface Type
  • Serrated
Jaw Type
  • Nose Side
Jaw Width
  • 0.688 in
  • 1 in
  • 43 mm
  • 88 mm
Jaw size
  • 17/32 in L
  • 13/16 in L x 13/16 in W x 3/8 in THK
  • 7/8 in L x 25/32 in W x 7/16 in THK
  • 1 in L x 7/8 in W x 7/16 in THK
  • 1-1/4 in L X 1-1/4 in W X 9/16 in THK
  • 1-1/4 in L X 1-1/2 in W X 7/16 in THK
  • 1-1/4 in L x 15/16 in W x 9/16 in THK
  • 1-1/2 in L x 1-5/16 in W x 5/8 in THK
  • 1-11/16 in L x 1/2 in THK
  • 1-13/16 in L x 1-1/4 in W x 13/32 in THK
  • 2 in L x 1-11/32 in W x 7/16 in THK
  • 2-3/8 in L x 1-1/2 in W x 15/32 in THK
  • 7 mm W x 46 mm THK
  • 9.5 mm W x 63 mm THK
  • 36 mm H x 24 mm W x 11 mm THK
Length
  • 2-5/8 in
  • 3
  • 3-1/8 in
  • 4-1/16 in
  • 4-1/2 in
  • 4.75 in
  • 5
  • 5-1/8 in
  • 6
  • 6-1/8 in
  • 7-1/8 in
  • 8-1/4 in
  • 8-1/4 in L
  • 9-3/8 in
  • 10 in
  • 10-1/2 in
  • 11 in
  • 11-1/2 in
  • 11-1/2 in L
  • 12 in
  • 13-3/4 in
  • 14 in
  • 14.5 in
Magnetized Tip
  • Yes
Male Drive Size
  • 1/4 in
  • 3/8 in
  • 1/2 in
  • 3/4 in
  • 1 in
Material
  • Alloy Carbon Steel
  • Alloy Steel
  • Aluminum
  • Carbon Steel
  • Chrome Vanadium Steel
  • Drop Forged Alloy Steel
  • Drop Forged American Alloy Steel
  • Drop Forged Steel
  • Ductile Iron
  • Fabric/Plastic
  • Fiberglass
  • Forged Alloy Steel
  • Forged Carbon Steel
  • Hardened Steel
  • Hickory
  • Iron
  • PVC
  • Polyester
  • Stainless Steel
  • Steel
  • Steel Alloy
  • Steel/Thermoplastic Handle
  • Vanadium Steel
  • Wood
Material Application
  • Bone/Dry Wood/Green Wood/Plastic
  • Chipboard/Fiber/Ordinary Wood/Plastic/Plywood
  • Ferrous Materials
  • Green Wood
  • Lumber/Wood
  • Metal
Maximum Jaw Spread
  • 2 in
  • 3-1/2 in
Maximum Torque
  • 40 in-lb
Measurement Scale Included
  • Yes
Measurement System
  • Imperial
  • Metric
  • Metric/Imperial
  • Metric/SAE
  • SAE
Nominal Capacity
  • 1-7/8 in
  • 2-3/4 in
Number of Pieces
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 30
  • 31
  • 32
  • 38
  • 46
  • 47
  • 52
  • 63
  • 70
  • 79
  • 100
  • 101
  • 117
  • 143
  • 170
Number of Points
  • 4
  • 6
  • 12
Offset Angle
  • 15/60 deg
  • 15 deg
  • 25 deg
  • 30 deg
  • 45 deg
Open End Thickness
  • 18.3 mm
  • 22.4 mm
  • 24.1 mm
  • 24.9 mm
  • 31.8 mm
  • 36.6 mm
  • 38.9 mm
  • 41.1 mm
Overall Length
  • 9/7/2008 in
  • 2 in
  • 3 in
  • 3-3/8 in
  • 3-1/2 in
  • 3-7/8 in
  • 4 in
  • 4-3/32 in
  • 4-1/4 in
  • 4-5/16 in
  • 4-1/2 in
  • 4-5/8 in
  • 4-3/4 in
  • 4.8 in
  • 4-7/8 in
  • 5 in
  • 5.063 in
  • 5-1/8 in
  • 5-7/32 in
  • 5-1/4 in
  • 5-7/16 in
  • 5-1/2 in
  • 5-3/4 in
  • 5-13/16 in
  • 5-7/8 in
  • 5.938 in
  • 6 in
  • 6-1/8 in
  • 6-1/4 in
  • 6.3 in
  • 6-5/16 in
  • 6-3/8 in
  • 6-7/16 in
  • 6-15/32 in
  • 6-1/2 in
  • 6-5/8 in
  • 6-3/4 in
  • 6-25/32 in
  • 6-13/16 in
  • 6-7/8 in
  • 7 in
  • 7-1/16 in
  • 7-1/8 in
  • 7-3/16 in
  • 7-1/4 in
  • 7.3 in
  • 7-3/8 in
  • 7-7/16 in
  • 7-1/2 in
  • 7-5/8 in
  • 7-21/32 in
  • 7-11/16 in
  • 7-3/4 in
  • 7-13/16 in
  • 7-7/8 in
  • 7-15/16 in
  • 8 in
  • 8-1/16 in
  • 8-1/8 in
  • 8-1/4 in
  • 8.3 in
  • 8-3/8 in
  • 8-1/2 in
  • 8-9/16 in
  • 8-5/8 in
  • 8-3/4 in
  • 9 in
  • 9-1/8 in
  • 9-1/4 in
  • 9-1/4 in in
  • 9-1/2 in
  • 9-5/8 in
  • 9-11/16 in
  • 9-3/4 in
  • 9.8 in
  • 9-13/16 in
  • 9-7/8 in
  • 10 in
  • 10-1/8 in
  • 10-1/4 in
  • 10.313 in
  • 10-3/8 in
  • 10-1/2 in
  • 10-9/16 in
  • 10-5/8 in
  • 10.78 in
  • 10.89 in
  • 11 in
  • 11 in in
  • 11.04 in
  • 11.188 in
  • 11.2 in
  • 11-1/4 in
  • 11-5/16 in
  • 11-3/8 in
  • 11-1/2 in
  • 11.61 in
  • 11-5/8 in
  • 11-11/16 in
  • 11-3/4 in
  • 11-7/8 in
  • 12 in
  • 12 in in
  • 12.02 in
  • 12-3/16 in
  • 12-1/4 in
  • 12-3/8 in
  • 12.38 in
  • 12-1/2 in
  • 12-9/16 in
  • 12.563 in
  • 12.63 in
  • 12.67 in
  • 12-11/16 in
  • 12-7/8 in
  • 13 in
  • 13-1/16 in
  • 13-1/4 in
  • 13.3 in
  • 13-5/16 in
  • 13.313 in
  • 13-7/16 in
  • 13-1/2 in
  • 13-1/2 in in
  • 13.65 in
  • 13-3/4 in
  • 13-13/16 in
  • 13-7/8 in
  • 14 in
  • 14 in in
  • 14.063 in
  • 14-1/8 in
  • 14-1/4 in
  • 14-1/2 in
  • 14-5/8 in
  • 14-3/4 in
  • 14-7/8 in
  • 15 in
  • 15-1/8 in
  • 15-1/4 in
  • 15.313 in
  • 15-1/2 in
  • 15-3/4 in
  • 15.8 in
  • 16 in
  • 16-1/8 in
  • 16-7/32 in
  • 16-1/4 in
  • 16-1/2 in
  • 16.6 in
  • 16.9 in
  • 17 in
  • 17-3/16 in
  • 17.188 in
  • 17.39 in
  • 17-3/4 in
  • 17.8 in
  • 18 in
  • 18-7/32 in
  • 18-1/4 in
  • 18-9/32 in
  • 18-3/8 in
  • 18-1/2 in
  • 18-3/4 in
  • 19 in
  • 19.3 in
  • 19-1/2 in
  • 20 in
  • 20-1/16 in
  • 20-1/8 in
  • 20.36 in
  • 20-1/2 in
  • 21 in
  • 21-1/2 in
  • 21-5/8 in
  • 21-3/4 in
  • 22 in
  • 22-1/2 in
  • 22-11/16 in
  • 23 in
  • 24 in
  • 24-1/4 in
  • 24.4 in
  • 25.17 in
  • 25-3/4 in
  • 26 in
  • 27 in
  • 27-1/2 in
  • 27.82 in
  • 28 in
  • 28-3/4 in
  • 29-1/4 in
  • 30 in
  • 31 in
  • 31.54 in
  • 34 in
  • 34-1/4 in
  • 36 in
  • 37 in
  • 37.5 mm
  • 42 in
  • 47 in
  • 48 in
  • 54 in
  • 70 in
  • 101.6 mm
  • 114.3 mm
  • 120.7 mm
  • 127 mm
  • 130.2 mm
  • 139.7 mm
  • 152.4 mm
  • 155.6 mm
  • 158.8 mm
  • 160 mm
  • 160.3 mm
  • 165.1 mm
  • 168.3 mm
  • 174.8 mm
  • 177.8 mm
  • 180 mm
  • 180.8 mm
  • 182.6 mm
  • 184.2 mm
  • 185 mm
  • 190.5 mm
  • 195.3 mm
  • 196.9 mm
  • 201.7 mm
  • 215.9 mm
  • 217.4 mm
  • 228.6 mm
  • 235 mm
  • 242.1 mm
  • 250 mm
  • 254 mm
  • 257 mm
  • 260.4 mm
  • 268.2 mm
  • 279.4 mm
  • 280 mm
  • 287.3 mm
  • 289 mm
  • 292.1 mm
  • 304.8 mm
  • 314.5 mm
  • 322.3 mm
  • 330.2 mm
  • 331 mm
  • 331.7 mm
  • 341.4 mm
  • 350.8 mm
  • 355.6 mm
  • 381 mm
  • 409.4 mm
  • 436.6 mm
  • 457.2 mm
  • 476.3 mm
  • 495.3 mm
  • 546.1 mm
  • 609.6 mm
  • 654.1 mm
  • 743 mm
  • 787.4 mm
Overall Width
  • 112 mm
  • 145 mm
Pin Diameter
  • 3/16 in
  • 13/64 in
  • 7/32 in
  • 15/64 in
  • 1/4 in
  • 17/64 in
  • 9/32 in
  • 19/64 in
  • 5/16 in
  • 11/32 in
  • 3/8 in
  • 7/16 in
Pipe Capacity
  • 1-1/2 in
  • 2 in
  • 2-1/2 in
  • 6 in
  • 8 in
Point Size
  • 5/32 in
  • 3/16 in
Point Type
  • Cabinet/Slotted
  • Phillips®/Slotted/Torx®
  • Slotted
Punch Size
  • 1/16 to 5/16 in
  • 3/32 in
  • 3/32 to 5/16 in
  • 1/8 in
  • 7/32 in
Reversible
  • Yes
Scale Range
  • 5 in-lb
Screwdriver Types Included
  • Phillips®/Pozidriv®/Slotted
  • Phillips®/Slotted/Torx®
Side Cutter
  • Yes
Size Range
  • 11/32 to 1-1/2 in
  • 3/8 to 3/4 in
  • 3/8 to 1 in
  • 3/8 to 1-1/4 in
  • 7/16 to 7/8 in
  • 3/4 to 1-1/2 in
  • 1-5/16 to 2 in
  • 6 to 14 mm
  • 6 to 19 mm
  • 6 to 24 mm
  • 6 to 28, 30, 32 mm
  • 6 to 32 mm
  • 7 to 15 mm
  • 7 to 24 mm
  • 9 to 36 mm
  • 10 to 18 mm
  • 19 to 40 mm
Socket Size
  • 5/32 in
  • 3/16 in
  • 7/32 in
  • 1/4 in
  • 9/32 in
  • 5/16 in
  • 11/32 in
  • 3/8 in
  • 7/16 in
  • 1/2 in
  • 9/16 in
  • 5/8 in
  • 11/16 in
  • 3/4 in
  • 13/16 and 1-1/2 in
  • 13/16 in
  • 7/8 in
  • 15/16 in
  • 1 in
  • 1-1/16 in
  • 1-1/8 in
  • 1-3/16 in
  • 1-1/4 in
  • 1-5/16 in
  • 1-3/8 in
  • 1-7/16 in
  • 1-1/2 in
  • 1-9/16 in
  • 1-5/8 in
  • 1-11/16 in
  • 1-3/4 in
  • 1-13/16 in
  • 1-7/8 in
  • 1-15/16 in
  • 2 in
  • 2-1/16 in
  • 2-1/8 in
  • 2-3/16 in
  • 2-1/4 in
  • 2-5/16 in
  • 2-3/8 in
  • 2-7/16 in
  • 2-1/2 in
  • 2-9/16 in
  • 2-5/8 in
  • 2-11/16 in
  • 2-3/4 in
  • 2-13/16 in
  • 2-7/8 in
  • 2-15/16 in
  • 3 in
  • 3-1/8 in
  • 3-1/4 in
  • 3-3/8 in
  • 3-1/2 in
  • 4 mm
  • 5 mm
  • 6 mm
  • 7 mm
  • 8 mm
  • 9 mm
  • 10 mm
  • 11 mm
  • 1-11/1 in
  • 12 mm
  • 13 mm
  • 1-13/1 in
  • 14 mm
  • 15 mm
  • 16 mm
  • 17 mm
  • 18 mm
  • 19 mm
  • 20 mm
  • 21 mm
  • 22 mm
  • 23 mm
  • 24 mm
  • 25 mm
  • 26 mm
  • 27 mm
  • 30 mm
  • 32 mm
  • 36 mm
Socket Type
  • Deep
  • Deep Impact
  • Deep Type I
  • Deep Type II
  • Deep Type III
  • Impact
  • Shallow Length
  • Standard Type I
  • Standard Type II
  • Standard Type III
Specifications
  • 1/8 in MNPT
  • 1/4 in Drive, 6-Point
  • 1/4 in, 3/8 in Drive, 6-Point
  • 1/4 in, 1/2 in Drive
  • 3/8 in Drive, 6 and 12-Point
  • 3/8 in Drive, 6-Point
  • 3/8 in Drive, 12-Point
  • 3/8 in Drive, Hex Bit
  • 3/8 in Drive, Torx® Bit
  • 3/8 in, 1/2 in Drive, Hex Bit
  • 3/8 in, 1/2 in, 3/4 in Drive
  • 1/2 in Drive, 6 and 12-Point
  • 1/2 in Drive, 6-Point
  • 1/2 in Drive, 12-Point
  • 1/2 in Drive, Hex Bit
  • 3/4 in Drive, 12-Point
  • 1 in Drive, 12-Point
  • 1 lb and 1-1/4 lb Ballpeen, 13 in Length
  • 1-3/4 in L Center Hub to Center Handle, 1/2 in Stock Square Bore, 1 in Dia x 1-1/4 in H Hub
  • 1-3/4 in L Center Hub to Center Handle, 5/8 in Square Bore, 1 in Dia x 1-1/4 in H Hub
  • 2-1/4 in L Center Hub to Center Handle, 1/2 in Stock Square Bore, 1 in Dia x 1-1/4 in H Hub
  • 2-1/4 in L Center Hub to Center Handle, 5/8 in Square Bore, 1 in Dia x 1-1/4 in H Hub
  • 3 in L Center Hub to Center Handle, 9/16 in Stock Square Bore, 1-1/4 in Dia x 1-1/2 in H Hub
  • 3 in L Center Hub to Center Handle, 13/16 in Square Bore, 1-1/4 in Dia x 1-1/2 in H Hub
  • 3-1/2 in L Center Hub to Center Handle, 1/2 in Stock Square Bore, 1-1/16 in Dia x 1-5/16 in H Hub
  • 3-1/2 in L Center Hub to Center Handle, 5/8 in Square Bore, 1-1/16 in Dia x 1-5/16 in H Hub
  • 4 in L Center Hub to Center Handle, 9/16 in Stock Square Bore, 1-1/4 in Dia x 1-3/8 in H Hub
  • 4 in L Center Hub to Center Handle, 13/16 in Square Bore, 1-1/4 in Dia x 1-3/8 in H Hub
  • 5 in L Center Hub to Center Handle, 5/8 in Stock Square Bore, 1-1/4 in Dia x 1-13/16 in H Hub
  • 5 in L Center Hub to Center Handle, 13/16 in Square Bore, 1-1/4 in Dia x 1-13/16 in H Hub
  • 6 in L Center Hub to Center Handle, 11/16 in Stock Square Bore, 1-1/4 in Dia x 2 in H Hub
  • 6 in L Center Hub to Center Handle, 13/16 in Square Bore, 1-1/4 in Dia x 2 in H Hub
  • 7-1/8 in L Center Hub to Center Handle, 7/8 in Square Bore, 1-3/8 in Dia x 2-1/16 in H Hub
  • 8 in L Center Hub to Center Handle, 7/8 in Stock Square Bore, 1-9/16 in Dia x 2-7/16 in H Hub
  • 8 in L Center Hub to Center Handle, 1 in Square Bore, 1-9/16 in Dia x 2-7/16 in H Hub
  • 9-1/8 in L Center Hub to Center Handle, 7/8 in Stock Square Bore, 1-1/2 in Dia x 2-1/2 in H Hub
  • 9-1/8 in L Center Hub to Center Handle, 1 in Square Bore, 1-1/2 in Dia x 2-1/2 in H Hub
  • 10 in L Center Hub to Center Handle, 1-1/8 in Square Bore, 1-3/4 in Dia x 3 in H Hub
  • Fiberglass Handle
  • G 1/4 Thread
  • Wood Handle
Specifications Met
  • ANSI B107.110
  • ANSI B107.2
  • ASME B107.14
  • ASME B107.28-2005
  • ASME B107.300 - 2010
  • ASME Specified
  • SAE
Style
  • Cape/Standard
  • Diamond Point
  • Standard Straight Shaft
Suitable For Use With
  • #36 to 60 Roller Chain
  • #80 to 240 Roller Chain
  • 1-1/2 lb G Series Standard Ball Peen Hammers
  • 2 lb G Series Standard Ball Peen Hammers
  • 2 oz Standard Ball Peen Hammers
  • 2-1/2 lb Standard Ball Peen Hammers
  • 2-1/2 lb and 3 lb G Series Standard Ball Peen Hammers
  • 3 lb Standard Ball Peen Hammers
  • 4 lb Sledge Hammers
  • 4 oz Ball Peen and Riveting Hammers
  • 6 in Pipe Wrench
  • 6 lb, 8 lb and 10 lb Sledge Hammers
  • 8 in Pipe Wrench
  • 8 oz Ball Peen and Riveting Hammers
  • 10 in Pipe Wrench
  • 12 and 16 oz Riveting/Settling Hammer
  • 12 in Pipe Wrench
  • 12 lb and 16 lb Sledge Hammers
  • 12 lb, 1 lb and 1-1/4 lb Standard Ball Peen Hammers
  • 14 in Pipe Wrench
  • 18 in Pipe Wrench
  • 20 deg P87 Snap Ring Retaining Pliers
  • 24 in Pipe Wrench
  • 36 in Pipe Wrench
  • 48 in Pipe Wrench
  • 60-100 Size Roller Chain
  • 64A Adaptor
  • 64A Series Impact Sockets
  • 67 Adaptor, 6107 Extension, 6110 Extension, 6113 Extension, 6140A Universal Joint, 6620-6634 Power/Impact Socket, 16624-16634 Power/Impact Socket
  • 76 Adaptor, 7624-7642 Power/Impact Socket, 17624-17642 Power/Impact Socket
  • 76 Series Impact Sockets
  • 77 Adaptor, 7140A Universal, 7107 Extension, 7110 Extension, 7113 Extension, 7644-7648 Power/Impact Socket, 17644-17648 Power/Impact Socket
  • 87A Adaptor, 8670 Power/Impact Socket
  • 90 deg P87 Snap Ring Retaining Pliers
  • 165 Body Hammers
  • 6636 Power/Impact Socket, 16636-16664 Power/Impact Socket
  • 6638-6664 Power/Impact Socket
  • 7650-7654 Power/Impact Socket, 17650-17652 Power/Impact Socket
  • 7656 Through 76112 and 17656 Through 17696 Impact Sockets
  • 7656-7680 Power/Impact Socket, 17654-17676 Power/Impact Socket
  • 7684-7696 Power/Impact Socket, 76100-76112 Power/Impact Socket
  • 8672-86152 Power/Impact Socket
  • All Body Hammers
  • All Body Hammers with 12 in Handle
  • All Hand Drilling Hammers
  • Brick Hammers
  • Cross Peen, Double Face Engineer Hammers and 155 Body Hammer
  • Dixon® Air Chief Lever Operated Blow Gun
  • Fast Turn Down of Fastener
  • Heavy Duty Retaining Ring Plier
  • LHC95 PVC Tubing and Hose Cutter
  • Machine Tools
  • Oil Ducts and Vent Holes
  • P65 and P75 Snap Ring Retaining Pliers
  • P1221 and P1421 Snap Ring Retaining Pliers
  • P1234 and P1434 Snap Ring Retaining Pliers
  • RS40 to RS80 Chain
  • RS80 to RS240 Chain
System of Measurement
  • Imperial
  • Metric
  • Metric/Imperial
Throat Depth
  • 8 in
Tip Material
  • Alloy Steel
Tip Size
  • 1/16 in
  • 1/8 in
  • 5/32 in
  • 3/16 in
  • 1/4 in
  • 0.31 in
  • 5/16 in
  • 3/8 in
  • 7/16 in
  • 1/2 in
  • 5/8 in
  • 3/4 in
  • 7/8 in
  • 1 in
Tip Type
  • Aligning Point/Bent Flat Wide End
  • Diamond Nose
  • Half Round
  • Magnetic
  • Round
Tool Storage Included
  • No
  • Yes
Tool Storage Type
  • Box
  • Metal Box
Torque Range
  • 0 to 100 ft-lb
  • 0 to 350 ft-lb
  • 0 to 600 ft-lb
  • 10 to 80 ft-lb
  • 10 to 100 ft-lb
  • 20 to 150 ft-lb
  • 30 to 250 ft-lb
  • 80 to 400 ft-lb
  • 100 to 600 ft-lb
  • 200 to 1000 ft-lb
Torx Size
  • 1/4 in
Type
  • 1-Piece
  • 2-Part
  • 5-Piece
  • 6-Point
  • 15-Pocket
  • Adjustable Dual Scale
  • Adjustable Single Scale
  • Deep Length Type I
  • Deep Length Type II
  • Deep Type I
  • Deep Type II
  • Deep Type III
  • Flex Socket
  • Heavy Duty
  • Impact
  • Imperial
  • Imperial Preassembled
  • Large
  • Medium
  • Metric
  • Micro Adjustable Lightweight
  • Open Top
  • Power Standard Length Type II
  • Power Standard Length Type III
  • Quick Release
  • SAE
  • Single Head
  • Single Scale Memory Needle Model
  • Small
  • Spark Plug
  • Stamped Tube
  • Standard
  • Standard Length Type I
  • Standard Length Type II
  • Standard Length Type III
  • Standard Type I
  • Standard Type II
  • Standard Type III
  • Stripped Thread
  • Tool
Width
  • 1
  • 1-1/4
Wire Stripper
  • No
Wrench Opening
  • 3/16 in
  • 1/5/2008 in
  • 1/5/2016 in
  • 1/4 in
  • 1/4 x 5/16 in
  • 5/16 in
  • 5/16 x 11/32 in
  • 5/16 x 3/8 in
  • 5/16 x 13/32 in
  • 1/3/2004 in
  • 11/32 in
  • 3/8 in
  • 3/8 x 7/16 in
  • 3/8 x 1/2 in
  • 7/16 in
  • 7/16 x 1/2 in
  • 7/16 x 9/16 in
  • 1/2 in
  • 1/2 x 9/16 in
  • 1/2 x 5/8 in
  • 9/16 in
  • 9/16 x 5/8 in
  • 9/16 x 11/16 in
  • 9/16 x 3/4 in
  • 19/32 x 11/16 in
  • 5/8 in
  • 5/8 x 11/16 in
  • 5/8 x 3/4 in
  • 11/16 in
  • 11/16 x 3/4 in
  • 11/16 x 25/32 in
  • 11/16 x 13/16 in
  • 11/16 x 7/8 in
  • 3/4 in
  • 3/4 x 13/16 in
  • 3/4 x 7/8 in
  • 13/16 in
  • 13/16 x 7/8 in
  • 7/8 in
  • 7/8 x 15/16 in
  • 7/8 x 1 in
  • 7/8 x 1-1/16 in
  • 15/16 in
  • 15/16 x 1 in
  • 15/16 x 1-1/16 in
  • 1 in
  • 1 x 1-1/8 in
  • 1-1/16 in
  • 1-1/16 x 1-1/8 in
  • 1-1/16 x 1-1/4 in
  • 1-1/8 in
  • 1-1/8 x 1-1/4 in
  • 1-1/8 x 1-5/16 in
  • 1-11/64 in
  • 1-3/16 in
  • 1-1/4 in
  • 1-1/4 x 1-5/16 in
  • 1-1/4 x 1-7/16 in
  • 1-1/4 x 1-5/8 in
  • 1-5/16 in
  • 1-5/16 x 1-1/2 in
  • 1-3/8 in
  • 1-3/8 x 1-7/16 in
  • 1-3/8 x 1-1/2 in
  • 1-7/16 in
  • 1-7/16 x 1-1/2 in
  • 1-7/16 x 1-5/8 in
  • 1-1/2 in
  • 1-1/2 x 1-5/8 in
  • 1-9/16 in
  • 1-5/8 in
  • 1-11/16 in
  • 1-11/16 x 1-7/8 in
  • 1-3/4 in
  • 1-13/16 in
  • 1-13/16 x 2 in
  • 1-7/8 in
  • 1-15/16 in
  • 2 in
  • 2-1/16 in
  • 2-1/8 in
  • 2-3/16 in
  • 2-3/16 x 2-3/8 in
  • 2-1/4 in
  • 2-1/4 x 2-7/16 in
  • 2-5/16 in
  • 2-3/8 in
  • 2-7/16 in
  • 2-1/2 in
  • 2-9/16 in
  • 2-5/8 in
  • 2-3/4 in
  • 2-13/16 in
  • 2-7/8 in
  • 2-15/16 in
  • 3 in
  • 3-1/8 in
  • 3-3/8 in
  • 3-1/2 in
  • 3-3/4 in
  • 3-7/8 in
  • 4-1/8 in
  • 4-1/4 in
  • 4-1/2 in
  • 4-5/8 in
  • 5 in
  • 6 mm
  • 7 mm
  • 8 mm
  • 9 mm
  • 10 mm
  • 11 mm
  • 12 mm
  • 13 mm
  • 14 mm
  • 15 mm
  • 16 mm
  • 17 mm
  • 18 mm
  • 19 mm
  • 20 mm
  • 21 mm
  • 22 mm
  • 23 mm
  • 24 mm
  • 25 mm
  • 26 mm
  • 27 mm
  • 28 mm
  • 29 mm
  • 30 mm
  • 32 mm
  • 34 mm
  • 36 mm
  • 37 mm
  • 38 mm
  • 40 mm
  • 41 mm
  • 42 mm
  • 44 mm
  • 46 mm
  • 48 mm
  • 50 mm
  • 52 mm
  • 55 mm
  • 60 mm
  • 65 mm
  • 70 mm
  • 75 mm
  • 80 mm
Wrench Type
  • Adjustable
  • Angled Head
  • Offset
  • Roughneck
  • Single
  • Straight
  • Straight Pattern
  • Thin Pattern


Tools

No Image

Power Tool Parts, Kits & Accessories

No Image

General Purpose Power Tools

No Image

Electrical Tools

No Image

General Purpose Hand Tools

No Image

Pipe, Hose & Tubing Hand Tools

No Image

Cutting Tools & Metalworking

No Image

Welding & Soldering

No Image

Machinery

Sort By 
Results Per Page 
List Grid
Compare  (0) Items Clear List