Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Motor Controls & Drives
- Electric Motors
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Electrical
- Conveyors & Conveyor Parts
- Heating, Fans, Ventilation, Vacuum
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
UCP201
Timken® UCP201 UCP200 Industrial Duty Single Row Standard Pillow Block Ball Bearing Unit, 12 mm Dia Bore, 95 mm L Bolt Center-to-Center, 30.2 mm Base to Bore Centerline, 127 mm OAL x 60 mm OAH
- CP#:
- Item#: UCP201
- Mfr#: UCP201
- UPC: 087796070899
- UCP pillow blocks are suggested for industrial applications where normal loads are encountered
- Compact, 1-piece housing with 2-bolt mounting can be installed in any position and makes bearing replacement easy
- These units use wide inner ring ball bearings with self aligning spherical outside diameters that compensate for shaft misalignment
- Timken® UCP series housed units feature the Timken® set screw locking (UC) bearing insert
- Bearing prelubricated and ready for immediate installation
- Grease fitting supplied for relubrication
- The bonded seal design is well suited for applications involving wet or dirty environments
- Bolt hole spacing dimensions and shaft center location are interchangeable with competitive units
- Housing designed for ease of bearing replacement
- Provides the first level of protection against contamination
- Bonded nitrile rubber seal with an engineered interface to the inner ring
- Helps protect against abrasive wear, extending seal life
- Engineered fit between bearing and housing to improve bearing life
- Precision machined lubrication groove and holes in the outer ring of the bearing
- Steel cage provides effective ball guidance and high temperature service capability
- Improved shaft support over narrow rings, improving bearing life and reducing misalignment
- 120 deg angle minimizes inner ring distortion for smoother running bearing
- Prelubricated with high-quality lithium-based grease, compatible with most industrial greases
- Spherical outer diameter
- CN internal clearance
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Timken® U series UCP 200 mounted ball bearings (housed units) feature Timken® U Series set screw locking (UC) style wide inner ring ball bearings, contact nitrile seal and an external flinger to provide multiple levels of protection against contamination. Timken® ball bearings are ideal for handling high speeds and light radial loads.
Timken®, UCP201, Pillow Block Ball Bearing Unit, Industrial Duty Single Row Standard, Series: UCP200, 12 mm Bore, 95 mm Bolt Center-to-Center Length, 30.2 mm Base to Bore Centerline, 127 mm Overall Length, 37.3 mm Overall Width, 60 mm Overall Height, Two-Bolt Base Mounting, Cylindrical Bore, 38 mm Base Width, Set Screw Locking Device, Triple Lip Seal, Non-Expansion, 12.8 lb Dynamic/6.7 lb Static Load, -20 to 100 deg C, 5800 rpm Maximum, Cast Iron, Powder Coated
SPECIFICATIONS
| Base Width | : | 38 mm |
| Base to Bore Centerline | : | 30.2 mm |
| Series | : | UCP200 |
| Bolt Center-to-Center Length | : | 95 mm |
| Mounting Type | : | Two-Bolt Base |
| Expansion Type | : | Non-Expansion |
| Locking Device | : | Set Screw |
| Finish | : | Powder Coated |
| Overall Length | : | 127 mm |
| Load Capacity | : | 12.8 lb Dynamic/6.7 lb Static |
| Material | : | Cast Iron |
| Maximum Speed | : | 5800 rpm |
| Overall Width | : | 37.3 mm |
| Inside Diameter | : | 12 mm |
| Overall Height | : | 60 mm |
| Measurement System | : | Metric |
| Seal Type | : | Triple Lip |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_UCP206_18_Catalog.pdf -
Instruction/Installation Manual https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_UCP206_18_Installation_Manual.pdf