Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Motor Controls & Drives
- Electric Motors
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Electrical
- Bushings
- Conveyors & Conveyor Parts
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Heating, Fans, Ventilation, Vacuum
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Pillow Block & Base Mount Bearings
- Pillow Block Roller Bearing Units
- Timken® QVPH28V415SET
QVPH28V415SET
Timken® QVPH28V415SET Pillow Block, 4.9375 in Dia Bore, 16 to 17.13 in L Bolt Center-to-Center, 6.0 in Base to Bore Centerline, 19.7 in OAL x 11.45 in OAH
- CP#:
- Item#: QVPH28V415SET
- Mfr#: QVPH28V415SET
- UPC: 883450343770
- Reliable mechanical withdrawal, preset spherical inner ring radial internal clearances (feeler gages are not required), quick installation, high shaft-holding power, works well in high-speed applications where shaft centering is an issue
- Labyrinth seal consists of a Teflon ring pressed onto the inner ring of the bearing that floats between two pieces of formed steel to accommodate misalignment
- When using this seal, the housing comes with a vent fitting
- Developed for higher-speed applications involving dirty conditions or moisture-affected areas, is able to operate at higher temperatures and is impervious to most chemicals
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Engineered for the harshest conditions, these units feature multiple steel-housing and locking options with complete multi-point sealing solutions (full range of end covers) to optimize your uptime. This drop-in solution is interchangeable with a large range of products and keeps contaminates out for efficient operations.
Timken®, QVPH28V415SET, Pillow Block, 4.9375 in Bore, 16 to 17.13 in Bolt Center-to-Center Length, 6.0 in Base to Bore Centerline, 19.7 in Overall Length, 6.02 in Overall Width, 11.45 in Overall Height, 4-Bolt Mounting, Tapered Bore, 5.04 in Base Width, Single V-Lock® Locking Device, Expansion, 863000 N Dynamic/1060000 N Static Load, -100 to 500 deg F, 900 rpm Grease/1200 rpm Oil Maximum, Steel, Painted
SPECIFICATIONS
| Base Width | : | 5.04 in |
| Base to Bore Centerline | : | 6.0 in |
| Bolt Center-to-Center Length | : | 16 to 17.13 in |
| Mounting Type | : | 4-Bolt |
| Expansion Type | : | Expansion |
| Locking Device | : | Single V-Lock® |
| Finish | : | Painted |
| Overall Length | : | 19.7 in |
| Load Capacity | : | 863000 N Dynamic/1060000 N Static |
| Material | : | Steel |
| Maximum Speed | : | 900 rpm Grease/1200 rpm Oil |
| Overall Width | : | 6.02 in |
| Inside Diameter | : | 4.9375 in |
| Overall Height | : | 11.45 in |
| Measurement System | : | Imperial |
| Seal Type | : | T Seal |