Locations
Thomson BSA™
190-9110
Thomson BSA™ 190-9110 Legacy Rolled Thread Ball Screw, 1-1/2 in Dia Screw, 1/4 in, Right Hand Thread, 144 in L, 1.379 in Dia Root, 1 Starts
- Item#: 190-9110 SCREW
- Mfr#: 190-9110
- Screw must be machined to fit into end support bearings
- Screw can be ordered with ends machined, assembled with ball nuts or support bearings
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
The ball screw drive is an assembly that converts rotary motion to linear motion. It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. The interface between the ball screw and the nut is made by ball bearings which roll in matching ball forms. With rolling elements, the ball screw drive has a very low friction coefficient and is typically greater than 90% efficient. The forces transmitted are distributed over a large number of ball bearings, giving a low relative load per ball comparatively.
Thomson BSA™ Ball Screw, Rolled Thread, Series: Legacy, 1-1/2 in Screw Diameter, 1/4 in Thread Lead, Right Hand Thread, 1.379 in Root Diameter, 144 in Length, 1 Starts, Steel, Manganese Phosphate
SPECIFICATIONS
| Finish | : | Manganese Phosphate |
| Material | : | Steel |
| Series | : | Legacy |
| Type | : | Rolled Thread |
| Screw Diameter | : | 1-1/2 in |
| Thread Lead | : | 1/4 in |
| Thread Direction | : | Right Hand |
| Length | : | 144 in |
| Root Diameter | : | 1.379 in |
| Number of Starts | : | 1 |
