Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Electrical
- Bushings
- Conveyors & Conveyor Parts
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Heating, Fans, Ventilation, Vacuum
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Roller Bearings
- Spherical Roller Bearings
- SNR® 21306VC3
21306VC3
SNR® 21306VC3 Spherical Roller Bearing, 30 mm Dia Bore, 72 mm OD, 2 Rows, 19 mm W, 66.2 kN Load
- CP#:
- Item#: 21306VC3
- Mfr#: 21306VC3
- The high radial accelerations of vibrating applications place a particular stress on the cage
- Specific dimensional tolerances guaranteed stability
- Reduced internal radial clearance easy set-up
- Surface optimization
- Reduced power consumption
- Improved performance and reduced friction torque
- Increased operating speeds
- Reduced operating costs
- Optimized internal design, symmetrical rollers
- C3 radial clearance greater than normal
- Pressed cage
- 66.2 kN dynamic/ 50.4 kN static
- Round bore
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
The outer ring of this type of bearing has a spherical raceway that allows angular movement of the rings. This means that the bearing can accept high degrees of misalignment. Its internal design enables it to withstand very high radial loads and axial loads. Variants with a tapered bore allow fitting using an adapter sleeve. This type of bearing is particularly suited to heavy mechanical applications where it is difficult to align the seats and radial loads are high. It is well suited to severe operating conditions, involving impact or vibration.
SNR® Spherical Roller Bearing, Series: 213, 30 mm Bore Dia, 72 mm Outside Dia, 2 Rows, 19 mm W, Open Closure, 66.2 kN, Through Hardened Steel Bearing, Steel Cage, 12000 rpm Maximum, -40 to 120 deg C
SPECIFICATIONS
| Series | : | 213 |
| Bearing Material | : | Through Hardened Steel |
| Load Capacity | : | 66.2 kN |
| Maximum Speed | : | 12000 rpm |
| Outside Diameter | : | 72 mm |
| Number of Rows | : | 2 |
| Width | : | 19 mm |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/428/NTN_3201_Catalog.pdf -
VIDEO LINK
https://youtu.be/4rXPAd9xD3w