Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Electrical
- Bushings
- Conveyors & Conveyor Parts
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Heating, Fans, Ventilation, Vacuum
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Pillow Block & Base Mount Bearings
- Pillow Block Ball Bearing Units
- SKF® SY 1.11/16 TF
SY 1.11/16 TF
SKF® SY 1.11/16 TF SY Series Standard-Duty Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 5-7/16 to 6-1/8 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-15/32 in OAL x 4-1/4 in OAH
- CP#:
- Item#: SY 1.11/16 TF
- Mfr#: SY 1.11/16 TF
- Prelubricated with a high quality, long life lithium/calcium grease
- Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial errors in alignment
- Designation permanently laser marked for easy identification of unit
- Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
- Molded glass fiber reinforced polyamide cage for durability and quiet running
- Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installation
- Solid housing provides a robust base with high break strength
- Set screw locking features two set screws 120 deg apart, this placement of the set screws maximizes holding power while minimizing inner ring distortion
- TF series units consists of the basic seal and a flinger mounted outboard, the flinger provides extra protection of the contact element
- Wide inner ring
- YAR series insert
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Ball bearing units consist of a precision wide inner ring bearing assembled into a housing made of cast iron or pressed steel. Units are pre-lubricated and are designed to slip fit on to the shaft. Locking method is either setscrew locking, eccentric self-locking or concentric. On cast iron and pressed steel units, the outside diameter of the bearing and the inside diameter of the housing are sphered, allowing the bearing to swivel within the housing to accommodate initial alignment.
SKF® Pillow Block Ball Bearing Unit, Standard-Duty, Series: SY Series, 1-11/16 in Bore, 5-7/16 to 6-1/8 in Bolt Center-to-Center Length, 2-1/8 in Base to Bore Centerline, 7-15/32 in Overall Length, 4-1/4 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.016 in Base Width, Set Screw Locking Device, Non-Expansion (Fixed) Expansion, 7470 lb Dynamic/4860 lb Static Load, 4300 rpm Maximum, Cast Iron, Uncoated
SPECIFICATIONS
| Base Width | : | 2.016 in |
| Base to Bore Centerline | : | 2-1/8 in |
| Series | : | SY Series |
| Bolt Center-to-Center Length | : | 5-7/16 to 6-1/8 in |
| Mounting Type | : | Two-Bolt Base |
| Expansion Type | : | Non-Expansion (Fixed) |
| Locking Device | : | Set Screw |
| Finish | : | Uncoated |
| Overall Length | : | 7-15/32 in |
| Load Capacity | : | 7470 lb Dynamic/4860 lb Static |
| Material | : | Cast Iron |
| Maximum Speed | : | 4300 rpm |
| Overall Height | : | 4-1/4 in |
DOCUMENTS
-
Specification Sheet https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/548/SKF_SY_1_11_16_TF_Specification_Sheet.pdf -
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/626/SKF_SY_1_2_FM_Catalog.pdf