piwik image

Call Us: 800-580-5588

MENU

Products

Contact

Locations

Resources

Services

About

Purvis Industries

SKF® NU 1036 ML
SKF®
Email Print

NU 1036 ML

SKF® NU 1036 ML NU Series Cylindrical Roller Bearing With Cage, 180 mm Dia Bore, 280 mm OD, 1 Row, 46 mm W, 380 kN Dynamic/475 kN Static Load

  • Item#: NU 1036 ML
  • Mfr#: NU 1036 ML
  • UPC: 7316570741292
    • Low friction - the open flange design together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity
    • Long service life - the logarithmic roller profile reduces edge stresses at the roller/raceway contact and sensitivity to misalignment and shaft deflection
    • Enhanced operational reliability - the surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film
    • The separable components of SKF® cylindrical roller bearings are interchangeable, this facilitates mounting and dismounting, as well as maintenance inspections
    • High speed capability - the cage designs are suitable for high speeds, rapid accelerations and peak loads
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading

DESCRIPTION

SKF® Cylindrical Roller Bearings are available in a wide range of designs, series, variants and sizes. The main design differences are the number of roller rows and the inner/outer ring flanges as well as cage designs and materials. The bearings can meet the challenges of applications faced with heavy radial loads and high speeds. Accommodating axial displacement (except for bearings with flanges on both the inner and outer rings), they offer high stiffness, low friction and long service life. Cylindrical Roller Bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements.

SKF® Cylindrical Roller Bearing, Series: NU Series, 180 mm Bore Dia, 280 mm Outside Dia, 1 Row, 46 mm Width, Open Closure, 380 kN Dynamic/475 kN Static, Steel Bearing, Machined Brass Cage, 4000 rpm Limiting/2600 rpm Reference Maximum

⚠ WARNING: This product can expose you to chemicals including one or more chemicals which are known to the State of California to cause cancer, and/or one or more chemicals which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

SPECIFICATIONS

Series      :      NU Series
Bearing Material      :      Steel
Load Capacity      :      380 kN Dynamic/475 kN Static
Maximum Speed      :      4000 rpm Limiting/2600 rpm Reference
Outside Diameter      :      280 mm
Number of Rows      :      1
Width      :      46 mm

DOCUMENTS

  • pdf
    Warranty Information     https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/1034/SKF_210N_Warranty.pdf
  • pdf
    Catalog     https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/1035/SKF_L314485_Catalog.pdf
  • pdf
    Specification Sheet     https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/1035/SKF_NU1036MLC3_Specification_Sheet.pdf