Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Electrical
- Bushings
- Conveyors & Conveyor Parts
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Abrasives
- Heating, Fans, Ventilation, Vacuum
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Roller Bearings
- Cylindrical Roller Bearings
- SKF® NJ 220 ECJ
NJ 220 ECJ
SKF® NJ 220 ECJ NJ Series Cylindrical Roller Bearing, 100 mm Dia Bore, 180 mm OD, 1 Row, 34 mm W, 285 kN Dynamic/305 kN Static Load
- CP#:
- Item#: NJ 220 ECJ
- Mfr#: NJ 220 ECJ
- The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity
- The logarithmic roller profile reduces edge stresses at the roller/raceway contact and sensitivity to misalignment and shaft deflection
- The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film
- The separable components of SKF® cylindrical roller bearings are interchangeable, this facilitates mounting and dismounting, as well as maintenance inspections
- The cage designs are suitable for high speeds, rapid accelerations and peak loads
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
SKF® Cylindrical Roller Bearing, Series: NJ Series, 100 mm Bore Dia, 180 mm Outside Dia, 1 Row, 34 mm W, Open Closure, 285 kN Dynamic/305 kN Static, Steel Bearing, Stamped Steel Cage, 4000 rpm Reference/4500 rpm Limiting Maximum, 300 deg F, Uncoated
SPECIFICATIONS
| Series | : | NJ Series |
| Bearing Material | : | Steel |
| Finish | : | Uncoated |
| Load Capacity | : | 285 kN Dynamic/305 kN Static |
| Maximum Speed | : | 4000 rpm Reference/4500 rpm Limiting |
| Outside Diameter | : | 180 mm |
| Number of Rows | : | 1 |
| Width | : | 34 mm |
DOCUMENTS
-
Specification Sheet https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/149/SKF_NJ_220_ECJ_Specification_Sheet.pdf