piwik image

Call Us: 800-580-5588

MENU

Products

Contact

Locations

Resources

Services

About

Purvis Industries

SKF® NJ 2004 EV/C3
SKF®

SKF® NJ 2004 EV/C3

loading
SKF® NJ 2004 EV/C3
SKF®
Email Print

NJ 2004 EV/C3

SKF® NJ 2004 EV/C3 NJ Series Cylindrical Roller Bearing, 20 mm Dia Bore, 42 mm OD, 1 Row, 14 mm W, 29.7 kN Dynamic/27.5 kN Static Load

  • Item#: NJ 2004 EV/C3
  • Mfr#: NJ 2004 EV/C3
    • The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity
    • The logarithmic roller profile reduces edge stresses at the roller/raceway contact and sensitivity to misalignment and shaft deflection
    • The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film
    • The separable components of SKF® cylindrical roller bearings are interchangeable, this facilitates mounting and dismounting, as well as maintenance inspections
    • The cage designs are suitable for high speeds, rapid accelerations and peak loads
    • C3-radial internal clearance greater than norma
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading

DESCRIPTION

SKF® Cylindrical Roller Bearing, Series: NJ Series, 20 mm Bore Dia, 42 mm Outside Dia, 1 Row, 14 mm W, Open Closure, 29.7 kN Dynamic/27.5 kN Static, Steel Bearing, Uncoated

SPECIFICATIONS

Series      :      NJ Series
Bearing Material      :      Steel
Finish      :      Uncoated
Load Capacity      :      29.7 kN Dynamic/27.5 kN Static
Outside Diameter      :      42 mm
Number of Rows      :      1
Width      :      14 mm