Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Seals, Gaskets & Packing
- Tools
- Tensioners & Idlers
- Bushings
- Hardware
- Adhesives, Sealants & Lubrication
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Safety & Security
- Abrasives
- Purvis Industries Specialty Products
- Material Handling, Storage & Rigging
- Tapes
- Batteries & Accessories
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Flange Mount Bearing Units
- Flange Mount Ball Bearing Units
- SKF® FY 2.1/4 TF
FY 2.1/4 TF
SKF® FY 2.1/4 TF FY Series Standard-Duty Non-Expansion Flanged Ball Bearing Unit, 2-1/14 in Dia Bore, 5-5/8 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 6-7/8 in OAL/Dia
- CP#:
- Item#: FY 2.1/4 TF
- Mfr#: FY 2.1/4 TF
- Prelubricated with a high quality, long life lithium/calcium grease
- Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial errors in alignment
- Designation permanently laser marked for easy identification of unit
- Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
- Molded glass fiber reinforced polyamide cage for durability and quiet running
- Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installation
- Solid housing provides a robust base with high break strength
- Set screw locking features two set screws 120 deg apart, this placement of the set screws maximizes holding power while minimizing inner ring distortion
- TF series units consists of the basic seal and a flinger mounted outboard, the flinger provides extra protection of the contact element
- Wide inner ring
- YAR series insert
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Four-bolt cast iron flange units are designed to support shafts through walls, bulkheads and other flat surfaces. The housing mounts flush to the surface and the load is carried by the four mounting bolts. F4BM medium duty housings accommodate a larger bearing for a given shaft size, resulting in a greater load carrying capacity. Both series are supplied with a grease fitting for relubrication and provide for initial bearing alignment.
SKF® Flanged Ball Bearing Unit, Standard-Duty Non-Expansion, Series: FY Series, 2-1/14 in Bore, 5-5/8 in Bolt Center-to-Center Length, 4-Bolt Flange Mounting, 6-7/8 in Overall Length/Diameter, 2.906 in Overall Depth, 6-7/8 in Overall Height, Set Screw Locking Device, Cast Iron Bearing, NBR Seal, 11860 lb Dynamic/8100 lb Static Load, 3400 rpm Maximum, -40 to 210 deg F, Uncoated
SPECIFICATIONS
| Bolt Center-to-Center Length | : | 5-5/8 in |
| Series | : | FY Series |
| Bearing Material | : | Cast Iron |
| Finish | : | Uncoated |
| Flange Mounting Type | : | 4-Bolt |
| Locking Device | : | Set Screw |
| Load Capacity | : | 11860 lb Dynamic/8100 lb Static |
| Maximum Speed | : | 3400 rpm |
| Overall Depth | : | 2.906 in |
| Overall Height | : | 6-7/8 in |
| Overall Length/Diameter | : | 6-7/8 in |
| Seal Material | : | NBR |
DOCUMENTS
-
Specification Sheet https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/169/SKF_FY_2_1_4_TF_Specification_Sheet.pdf -
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/626/SKF_SY_1_2_FM_Catalog.pdf