Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Seals, Gaskets & Packing
- Tools
- Tensioners & Idlers
- Bushings
- Hardware
- Adhesives, Sealants & Lubrication
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Safety & Security
- Abrasives
- Purvis Industries Specialty Products
- Material Handling, Storage & Rigging
- Tapes
- Batteries & Accessories
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Flange Mount Bearing Units
- Flange Mount Ball Bearing Units
- SKF® FY 1.7/16 RM
FY 1.7/16 RM
SKF® FY 1.7/16 RM FY Series Standard-Duty Flanged Ball Bearing Unit, 1-7/16 in Dia Bore, 3-5/8 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 4-5/8 in OAL/Dia
- CP#:
- Item#: FY 1.7/16 RM
- Mfr#: FY 1.7/16 RM
- Prelubricated with a high quality, long life lithium/calcium grease
- Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial errors in alignment
- Designation permanently laser marked for easy identification of unit
- Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
- Molded glass fiber reinforced polyamide cage for durability and quiet running
- Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installation
- Solid housing provides a robust base with high break strength
- Set screw locking features two set screws 120 deg apart, this placement of the set screws maximizes holding power while minimizing inner ring distortion
- RM series units consists of grease-purgeable contact seal is comprised of a wear resistant elastomer lip bonded to a steel trash guard
- Narrow inner ring
- YAT series insert
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Four-bolt cast iron flange units are designed to support shafts through walls, bulkheads and other flat surfaces. The housing mounts flush to the surface and the load is carried by the four mounting bolts. F4BM medium duty housings accommodate a larger bearing for a given shaft size, resulting in a greater load carrying capacity. Both series are supplied with a grease fitting for relubrication and provide for initial bearing alignment.
SKF® Flanged Ball Bearing Unit, Standard-Duty, Series: FY Series, 1-7/16 in Bore, 3-5/8 in Bolt Center-to-Center Length, 4-Bolt Flange Mounting, 4-5/8 in Overall Length/Diameter, 1.823 in Overall Depth, 4-5/8 in Overall Height, Set Screw Locking Device, Cast Iron Bearing, Elastomer Seal, 5740 lb Dynamic/3440 lb Static Load, 5300 rpm Maximum
SPECIFICATIONS
| Bolt Center-to-Center Length | : | 3-5/8 in |
| Series | : | FY Series |
| Bearing Material | : | Cast Iron |
| Flange Mounting Type | : | 4-Bolt |
| Locking Device | : | Set Screw |
| Load Capacity | : | 5740 lb Dynamic/3440 lb Static |
| Maximum Speed | : | 5300 rpm |
| Overall Depth | : | 1.823 in |
| Overall Height | : | 4-5/8 in |
| Overall Length/Diameter | : | 4-5/8 in |
| Seal Material | : | Elastomer |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/626/SKF_SY_1_2_FM_Catalog.pdf