Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Seals, Gaskets & Packing
- Tools
- Tensioners & Idlers
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Safety & Security
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Purvis Industries Specialty Products
- Abrasives
- Material Handling, Storage & Rigging
- Tapes
- Batteries & Accessories
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Ball Bearings
- Deep Groove Ball Bearings
- SKF® 6205 2RSJEM
6205 2RSJEM
SKF® 6205 2RSJEM 62 Series Radial Deep Groove Ball Bearing, 25 mm Dia Bore, 52 mm OD, 1 Rows, 15 mm W, 14.8 kN Dynamic/7.8 kN Static Load
- CP#:
- Item#: 6205 2RSJEM
- Mfr#: 6205 2RSJEM
- Higher dynamic load carrying capacity
- Reduced noise and vibration levels
- Less frictional heat
- Significantly extended bearing service life
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Deep groove ball bearings are particularly versatile. They are suitable for high and very high speeds, accommodate radial and axial loads in both directions and require little maintenance. Because deep groove ball bearings are the most widely used bearing type, they are available from SKF® in many designs, variants and sizes.
SKF® Deep Groove Ball Bearing, Radial, Series: 62 Series, 25 mm Bore, 52 mm OD, 1 Rows, 15 mm Width, Double Seal Closure, 14.8 kN Dynamic/7.8 kN Static Load, Steel Bearing, Buna-N Seal, Steel Cage, 28000 rpm Reference/18000 rpm Limiting Maximum, -22 to 284 deg F, Uncoated
SPECIFICATIONS
| Series | : | 62 Series |
| Bearing Material | : | Steel |
| Finish | : | Uncoated |
| Load Capacity | : | 14.8 kN Dynamic/7.8 kN Static |
| Maximum Speed | : | 28000 rpm Reference/18000 rpm Limiting |
| Outside Diameter | : | 52 mm |
| Number of Rows | : | 1 |
| Seal Material | : | Buna-N |
| Width | : | 15 mm |