Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Motor Controls & Drives
- Electric Motors
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tools
- Tensioners & Idlers
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Electrical
- Conveyors & Conveyor Parts
- Heating, Fans, Ventilation, Vacuum
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Ball Bearings
- Deep Groove Ball Bearings
- SKF® 618/560 MA/C3
618/560 MA/C3
SKF® 618/560 MA/C3 61 Series Radial Deep Groove Ball Bearing, 560 mm Dia Bore, 680 mm OD, 1 Row, 56 mm W, 345 kN Dynamic/695 kN Static Load
- CP#:
- Item#: 618/560 MA/C3
- Mfr#: 618/560 MA/C3
- Higher dynamic load carrying capacity
- Reduced noise and vibration levels
- Less frictional heat
- Significantly extended bearing service life
- C3-radial internal clearance greater than normal
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Deep groove ball bearings are particularly versatile. They are suitable for high and very high speeds, accommodate radial and axial loads in both directions and require little maintenance. Because deep groove ball bearings are the most widely used bearing type, they are available from SKF® in many designs, variants and sizes.
SKF® Deep Groove Ball Bearing, Radial, Series: 61 Series, 560 mm Bore Dia, 680 mm Outside Dia, 1 Row, 56 mm W, Open Closure, 345 kN Dynamic/695 kN Static, Steel Bearing, Machined Brass Cage, 1600 rpm Reference/1300 rpm Limiting Maximum, 120 deg C, Uncoated
SPECIFICATIONS
| Series | : | 61 Series |
| Bearing Material | : | Steel |
| Finish | : | Uncoated |
| Load Capacity | : | 345 kN Dynamic/695 kN Static |
| Maximum Speed | : | 1600 rpm Reference/1300 rpm Limiting |
| Outside Diameter | : | 680 mm |
| Number of Rows | : | 1 |
| Width | : | 56 mm |
DOCUMENTS
-
Specification Sheet https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/129/SKF_618_560_MA_C3_Specification_Sheet.pdf