piwik image

Call Us: 800-580-5588

MENU

Products

Contact

Locations

Resources

Services

About

Purvis Industries

SKF® 32040 X
SKF®
Email Print

32040 X

SKF® 32040 X Tapered Roller Bearing, 200 mm Dia Bore, 310 mm OD, 1 Row, 70 mm W, 1370 kN Load

  • Item#: 32040 X
  • Mfr#: 32040 X
    • The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction
    • This also reduces frictional heat and flange wear
    • In addition, the bearings can better maintain preload and run at reduced noise levels
    • The crowned raceway profiles of basic design bearings and the logarithmic raceway profiles of SKF® explorer bearings optimize the load distribution along the contact surfaces, reduce stress peaks at the roller ends and reduce the sensitivity to misalignment and shaft deflection compared with conventional straight raceway profiles
    • Optimized surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film
    • The rollers incorporated in SKF® tapered roller bearings are manufactured to such close dimensional and geometrical tolerances that they are practically identical
    • This provides optimal load distribution, reduces noise and vibration and enables preload to be set more accurately
    • A single row tapered roller bearing is typically adjusted against a second tapered roller bearing
    • By applying a preload, a rigid bearing application can be achieved
    • Tapered roller bearings typically have a running-in period, during which a conventional design tapered roller bearing experiences a significant amount of friction, resulting in wear
    • This effect is noticed as a temperature spike
    • With SKF® tapered roller bearing designs, friction, frictional heat and wear are significantly reduced, provided the bearings are mounted and lubricated correctly
    • The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup)
    • Furthermore, the separable components are interchangeable
    • This facilitates mounting, dismounting and also maintenance inspection routines
    • 800 kN basic dynamic/1370 kN basic static load
    • Bearings with retention sleeve with annular groove and lubrication holes over the outer rings
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading

DESCRIPTION

SKF® single row tapered roller bearings are designed to accommodate combined loads, that is simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis (apex point A) to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10 and 30 deg, is related to the calculation factor e (from the data table): the larger the value of e, the larger the contact angle.

SKF® Tapered Roller Bearing, 200 mm Bore, 310 mm OD, 1 Row, 70 mm Width, 1370 kN Load, Stamped Steel Cage, 1400 rpm Reference/1900 rpm Limiting Maximum, 300 deg F

SPECIFICATIONS

Load Capacity      :      1370 kN
Maximum Speed      :      1400 rpm Reference/1900 rpm Limiting
Outside Diameter      :      310 mm
Number of Rows      :      1
Width      :      70 mm

DOCUMENTS

  • pdf
    Specification Sheet     https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/739/SKF_32040X_Specification_Sheet.pdf