Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Seals, Gaskets & Packing
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Safety & Security
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Purvis Industries Specialty Products
- Abrasives
- Material Handling, Storage & Rigging
- Batteries & Accessories
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
609LLU
NTN 609LLU Micro Round Bore Extra Small Deep Groove Radial Ball Bearing, 9 mm Dia Bore, 24 mm OD, 1 Rows, 7 mm W, 3400 N Load
- CP#:
- Item#: 609JX2LLU
- Mfr#: 609LLU
- The seal edge forms a double-lip
- The inner lip touches the V-slot side of the inner rings seal surface
- There is a slight gap between the inner ring and the outer lip which produces the labyrinth effect
- Even if friction causes the inner lip to wear, the outer lip constricts around the inner ring to compensate, and thus constantly preserving the perfect sealing effect
- Due to the fact that it is a contact type seal bearing, the torque will be a little greater but the seal will provide the optimum protection from dust penetration
- Contact type rubber seal
- Normal clearance
- ISO class 0 precision rating
- 3400 N dynamic/1450 N static
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Single Row Radial Ball Bearings are the most widely used bearings and utilize an uninterrupted raceway, which makes these bearings suitable for radial loads, or a combination of thrust and radial loads. This design permits precision tolerances even at high speed operation. The cage in this bearing is pressed steel. For high speed bearings, machined brass cages are available. Bearings with locating snap rings are also available.
NTN Deep Groove Radial Ball Bearing, Round Bore Extra Small, Series: Micro, 9 mm Bore, 24 mm OD, 1 Rows, 7 mm Width, Double Seal Closure, 3400 N Load, High Carbon Chrome Steel Bearing, Nitrile Rubber Seal, Pressed Steel Cage, 22000 rpm Grease Maximum, -40 to 120 deg C
SPECIFICATIONS
| Series | : | Micro |
| Bearing Material | : | High Carbon Chrome Steel |
| Load Capacity | : | 3400 N |
| Maximum Speed | : | 22000 rpm Grease |
| Outside Diameter | : | 24 mm |
| Number of Rows | : | 1 |
| Seal Material | : | Nitrile Rubber |
| Width | : | 7 mm |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/428/NTN_3201_Catalog.pdf