Locations
NTN
5210T2LLU
NTN 5210T2LLU 52 Series Round Bore Angular Contact Ball Bearing, 50 mm Dia Bore, 90 mm OD, 2 Rows, 30.2 mm W, 30 deg
- Item#: 5210EEG15
- Mfr#: 5210T2LLU
- The seal edge forms a double-lip
- The inner lip touches the V-slot side of the inner rings seal surface
- There is a slight gap between the inner ring and the outer lip which produces the labyrinth effect
- Even if friction causes the inner lip to wear, the outer lip constricts around the inner ring to compensate, and thus constantly preserving the perfect sealing effect
- Due to the fact that it is a contact type seal bearing, the torque will be a little greater but the seal will provide the optimum protection from dust penetration
- Without filling slot
- Contact type rubber seal
- Normal clearance
- ISO class 0 precision rating
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Double Row Angular Contact Ball Bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. The 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. Since the 3200 and 3300 series have filling slots, it is necessary to mount them with the thrust load acting against the unnotched face of the rings.
NTN Angular Contact Ball Bearing, Round Bore, Series: 52 Series, 50 mm Bore, 90 mm OD, 2 Rows, 30.2 mm Width, 30 deg Contact Angle, Double Seal Closure, High Carbon Chrome Steel Bearing, Nitrile Rubber Seal, Nylon Cage, 4700 rpm Grease Maximum, -40 to 120 deg C
SPECIFICATIONS
| Bearing Material | : | High Carbon Chrome Steel |
| Cage Material | : | Nylon |
| Closure Type | : | Double Seal |
| Contact Angle | : | 30 deg |
| Maximum Speed | : | 4700 rpm Grease |
| Outside Diameter | : | 90 mm |
| Number of Rows | : | 2 |
| Inside Diameter | : | 50 mm |
| Seal Material | : | Nitrile Rubber |
| Mounted | : | No |
| Measurement System | : | Metric |
| Temperature Rating | : | -40 to 120 deg C |
| Width | : | 30.2 mm |
