Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Motor Controls & Drives
- Electric Motors
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Electrical
- Bushings
- Conveyors & Conveyor Parts
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Heating, Fans, Ventilation, Vacuum
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Gears
- Miter Gears
- Straight Miter Gears
- Martin M1025B
M1025B
Martin M1025B M Series Plain Reborable Straight Tooth Miter Gear, 10 Diametral Pitch, 20 deg Pressure Angle, 25 Teeth, 2-1/2 in Dia Pitch, 0.55 in W Face, 1 to 1.126 in Dia Bore, Steel
- CP#:
- Item#: M1025B
- Mfr#: M1025B
- UPC: 697950051932
- Right angle drives with varied ratios
- Commercial Class Gear. AGMA 6-8
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Martin stock miter gears are manufactured from 0.4 carbon steel. The "M" series is furnished unhardened with plain bore. The "HM" series is furnished hardened teeth with plain bore. The "HMK" series is furnished hardened teeth with keyway and setscrew for installation on the shaft. Hardened miter gears have approximately 50% more horsepower capacity and provide greater gear wear than untreated gears. All Martin miter gears are cut with the 20 deg pressure angle system.
Martin Straight Tooth Miter Gear, Plain Reborable, Series: M Series, 1 to 1.126 in Bore Dia, 2.641 in Outside Dia, 25 Teeth, 10 Diametral Pitch, 2-1/2 in, 0.55 in Face Width, No Screws, 2 in Hub Dia, 0.938 in Hub Projection, 1-5/8 in Overall Length, 20 deg Pressure Angle, Steel
SPECIFICATIONS
| Hub Diameter | : | 2 in |
| Hub Projection | : | 0.938 in |
| Hub Type | : | No Screws |
| Outside Diameter | : | 2.641 in |
| Overall Length | : | 1-5/8 in |
| Series | : | M Series |
| Type | : | Plain Reborable |
| Diametral Pitch | : | 10 |
| Pressure Angle | : | 20 deg |
| Number of Teeth | : | 25 |
| Pitch Diameter | : | 2-1/2 in |
| Face Width | : | 0.55 in |
| Bore Diameter | : | 1 to 1.126 in |
| Material | : | Steel |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/Martin_B1015-4_Catalog.pdf