Locations
Martin
HM1414A
Martin HM1414A Plain Reborable Straight Miter Gear, 14 Diametral Pitch, Right Angle Rotation, 20 deg Pressure Angle, 14 Teeth, 1 in Dia Pitch, 0.19 in W Face, 0.4375 to 0.501 in Dia Bore, Carbon Steel
- Item#: HM1414A
- Mfr#: HM1414A
- UPC: 697950052311
- Precise machining and processes ensure consistent finish and high quality
- AGMA 6 to 8 commercial class gear
- Hardened teeth
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Martin stock miter gears are manufactured from 0.4 carbon steel. The "M" series is furnished unhardened with plain bore. The "HM" series is furnished hardened teeth with plain bore. The "HMK" series is furnished hardened teeth with keyway and setscrew for installation on the shaft. Hardened miter gears have approximately 50% more horsepower capacity and provide greater gear wear than untreated gears. All Martin miter gears are cut with the 20 deg pressure angle system.
Martin Straight Miter Gear, Plain Reborable, 0.4375 to 0.501 in Bore Dia, 1.101 in Outside Dia, 1:1 Gear Ratio, 14 Teeth, 14 Diametral Pitch, 1 in, 0.19 in Face Width, Right Angle Direction of Rotation, No Screws, 7/8 in Hub Dia, 1/2 in Hub Projection, 47/64 in Overall Length, 20 deg Pressure Angle, Carbon Steel
SPECIFICATIONS
| Gear Ratio | : | 1:1 |
| Hub Diameter | : | 7/8 in |
| Hub Projection | : | 1/2 in |
| Hub Type | : | No Screws |
| Outside Diameter | : | 1.101 in |
| Overall Length | : | 47/64 in |
| Series | : | HM |
| Type | : | Plain Reborable |
| Diametral Pitch | : | 14 |
| Direction of Rotation | : | Right Angle |
| Pressure Angle | : | 20 deg |
| Number of Teeth | : | 14 |
| Pitch Diameter | : | 1 in |
| Face Width | : | 0.19 in |
| Bore Diameter | : | 0.4375 to 0.501 in |
| Material | : | Carbon Steel |
