Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Motor Controls & Drives
- Electric Motors
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Electrical
- Bushings
- Conveyors & Conveyor Parts
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Heating, Fans, Ventilation, Vacuum
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Gears
- Miter Gears
- Straight Miter Gears
- Martin HM1221B
HM1221B
Martin HM1221B Plain Reborable Straight Miter Gear, 12 Diametral Pitch, Right Angle Rotation, 20 deg Pressure Angle, 21 Teeth, 1-3/4 in Dia Pitch, 0.39 in W Face, 0.625 to 0.6885 in Dia Bore, Carbon Steel
- CP#:
- Item#: HM1221B
- Mfr#: HM1221B
- UPC: 697950052212
- Precise machining and processes ensure consistent finish and high quality
- AGMA 6 to 8 commercial class gear
- Hardened teeth
- Right angle drives with 1:1 ratio
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Martin stock miter gears are manufactured from 0.4 carbon steel. The "M" series is furnished unhardened with plain bore. The "HM" series is furnished hardened teeth with plain bore. The "HMK" series is furnished hardened teeth with keyway and setscrew for installation on the shaft. Hardened miter gears have approximately 50% more horsepower capacity and provide greater gear wear than untreated gears. All Martin miter gears are cut with the 20 deg pressure angle system.
Martin Straight Miter Gear, Plain Reborable, 0.625 to 0.6885 in Bore Dia, 1.868 in Outside Dia, 1:1 Gear Ratio, 21 Teeth, 12 Diametral Pitch, 1-3/4 in, 0.39 in Face Width, Right Angle Direction of Rotation, No Screws, 1-3/8 in Hub Dia, 0.688 in Hub Projection, 1-3/16 in Overall Length, 20 deg Pressure Angle, Carbon Steel
SPECIFICATIONS
| Gear Ratio | : | 1:1 |
| Hub Diameter | : | 1-3/8 in |
| Hub Projection | : | 0.688 in |
| Hub Type | : | No Screws |
| Outside Diameter | : | 1.868 in |
| Overall Length | : | 1-3/16 in |
| Series | : | HM |
| Type | : | Plain Reborable |
| Diametral Pitch | : | 12 |
| Direction of Rotation | : | Right Angle |
| Pressure Angle | : | 20 deg |
| Number of Teeth | : | 21 |
| Pitch Diameter | : | 1-3/4 in |
| Face Width | : | 0.39 in |
| Bore Diameter | : | 0.625 to 0.6885 in |
| Material | : | Carbon Steel |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/Martin_M424_Catalog.pdf -
Specification Sheet https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/Martin_M424_Specification_Sheet.pdf