Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Motor Controls & Drives
- Electric Motors
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Electrical
- Bushings
- Conveyors & Conveyor Parts
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Heating, Fans, Ventilation, Vacuum
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Tools
- General Purpose Hand Tools
- Wrenches
- Open End Wrenches
- Martin 3730MM
3730MM
Martin 3730MM Double Headed Angled Opening Hydraulic Wrench, 30 mm Wrench, 254 mm L, Alloy Steel, Satin Chrome Plated
- CP#:
- Item#: 3730MM
- Mfr#: 3730MM
- UPC: 697950958842
- Same opening both ends
- Small head and thin stem for tight areas
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
A special purpose thin head double end wrench which combines a 15 deg offset slotted opening at one end and a 60 deg offset slotted opening at the other end. These wrenches have thin heads with the same opening on each end. Use these wrenches for work in areas with extremely tight clearances. Angled opening hydraulic wrenches are drop forged from steel bar and incorporates our exclusive V-notch opening for maximum surface contact. They are available in a chrome finish.
Martin Angled Opening Hydraulic Wrench, Double Headed, Measurement System: Metric, 30 mm Wrench Opening, 254 mm Overall Length, 57.2 mm Open End Width, 7.9 mm Open End Thickness, 15 and 60 deg Head, Alloy Steel, Satin Chrome Plated
SPECIFICATIONS
| Head Angle | : | 15 and 60 deg |
| Open End Thickness | : | 7.9 mm |
| Open End Width | : | 57.2 mm |
| Type | : | Double Headed |
| Measurement System | : | Metric |
| Wrench Opening | : | 30 mm |
| Overall Length | : | 254 mm |
| Material | : | Alloy Steel |
| Finish/Coating | : | Satin Chrome Plated |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/Martin_BD12T_Catalog.pdf