Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Belt, Sheaves & Pulleys
- Sheaves & Pulleys
- Synchronous Pulleys
- Timing Pulleys
- Martin 30H100 SD
30H100 SD
Martin 30H100 SD Solid Type GF-1 Stock Timing Pulley, 1/2 to 2 in QD® Bushed Bore, 4.721 in OD, 30 Grooves, 4.775 in Dia Pitch, 1.312 in W Face
- CP#:
- Item#: 30H100 SD
- Mfr#: 30H100 SD
- UPC: 697950151878
- Exhibit many of the best features of chain drives and belt drives
- Non-slip toothed drive with no metal to metal contact
- No lubrication needed
- Precise machining and processes ensure consistent finish and high quality
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Martin timing pulleys are manufactured to extremely close specifications and are stocked in minimum plain bore, taper bushed, QD bushed styles depending on size and pitch. Synchronous sprockets are non-slip toothed drives that require no lubrication. These sprockets have a wide speed range, are very efficient and make less noise than chain drives. Teeth on the belts are molded to conform with and engage the teeth on a mating sprocket.
Martin Stock Timing Pulley, Solid Type GF-1, QD® Bushed Bore, 1/2 to 2 in Bore Dia, 4.721 in Outside Dia, 4.775 in, 30 Grooves, 1/2 in Pitch, 1.312 in Face Width, 5.005 in Flange Dia, SD Bushing, 1-13/16 in Overall Length, For Use With: 1 in W Type H Belt, Cast Iron
SPECIFICATIONS
| Overall Length | : | 1-13/16 in |
| Pitch | : | 1/2 in |
| Material | : | Cast Iron |
| Bushing Type | : | SD |
| Bore Diameter | : | 1/2 to 2 in |
| Bore Type | : | QD® Bushed |
| Outside Diameter | : | 4.721 in |
| Number of Grooves | : | 30 |
| Pitch Diameter | : | 4.775 in |
| Face Width | : | 1.312 in |
| Type | : | Solid Type GF-1 |
| Flange Diameter | : | 5.005 in |
| Suitable For Use With | : | 1 in W Type H Belt |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/Martin_10L050_Catalog.pdf