Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Motor Controls & Drives
- Electric Motors
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Electrical
- Bushings
- Conveyors & Conveyor Parts
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Heating, Fans, Ventilation, Vacuum
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Tools
- General Purpose Hand Tools
- Wrenches
- Service/Pump Wrenches
- Martin 1230MM
1230MM
Martin 1230MM BD6 Thin Pattern Service/Pump Wrench, 30 mm Wrench, Open End Head, 30 deg Offset, 182.6 mm OAL, Forged Alloy Steel, Polished Chrome
- CP#:
- Item#: 1230MM
- Mfr#: 1230MM
- UPC: 697950436227
- A special purpose thin head single end wrench with a 30 deg angled slotted opening
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
30° Angle Service Wrenches are made in the U.S.A. (Also referred to as Pump Wrench) A special purpose Thin Head Single End wrench with a 30 degree angled slotted opening. The thin pattern helps with use on jam nuts and in confined areas. They are generally used for servicing pumps, glands, valves, etc…30 degree Service wrenches are manufactured from steel bar. Metric sizes from 19mm through 65mm are available in Chrome finish only.
Martin Service/Pump Wrench, Thin Pattern, Series: BD6, Measurement System: Metric, 30 mm Wrench Opening, 182.6 mm Overall Length, Open End Head, 30 deg Head, 52.4 mm Head Width, 30 deg Offset, 6.4 mm Head Thickness, Flat Handle, Forged Alloy Steel, Polished Chrome
SPECIFICATIONS
| Handle Type | : | Flat |
| Head Angle | : | 30 deg |
| Head Thickness | : | 6.4 mm |
| Head Width | : | 52.4 mm |
| Series | : | BD6 |
| Type | : | Thin Pattern |
| Measurement System | : | Metric |
| Wrench Opening | : | 30 mm |
| Head Type | : | Open End |
| Offset Angle | : | 30 deg |
| Overall Length | : | 182.6 mm |
| Material | : | Forged Alloy Steel |
| Finish/Coating | : | Polished Chrome |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/Martin_1224_Catalog.pdf