Locations
Martin
120H100 SF
Martin 120H100 SF Arms/Spoke Type H-3 Stock Timing Pulley, 0.5 to 2.983 in QD® Bushed Bore, 19.0485 in OD, 120 Grooves, 19.099 in Dia Pitch, 1-5/16 in W Face
- Item#: 120H100 SF
- Mfr#: 120H100 SF
- UPC: 697950095868
- Trapezoidal tooth form
- Non slip toothed drive with no metal to metal contact
- No lubrication needed
- Exhibit many of the best features of chain drives and belt drives
- Precise machining and processes ensure consistent finish and high quality
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Martin timing pulleys are manufactured to extremely close specifications and are stocked in minimum plain bore, taper bushed, QD Bushed styles depending on size and pitch. Synchronous sprockets are non slip toothed drives that require no lubrication. These sprockets have a wide speed range are very efficient and make less noise than chain drives. Teeth on the belts are molded to conform with and engage the teeth on a mating sprocket.
Martin Stock Timing Pulley, Arms/Spoke Type H-3, QD® Bushed Bore, 0.5 to 2.983 in Bore Dia, 19.0485 in Outside Dia, 19.099 in, 120 Grooves, 1/2 in Pitch, 1-5/16 in Face Width, 5-1/8 in Hub Dia, 11/16 in Hub Projection, SF Bushing, 2-1/16 in Overall Length, For Use With: 1 in W Type H Belt, Cast Iron
SPECIFICATIONS
| Bushing Type | : | SF |
| Hub Diameter | : | 5-1/8 in |
| Hub Projection | : | 11/16 in |
| Material | : | Cast Iron |
| Overall Length | : | 2-1/16 in |
| Pitch | : | 1/2 in |
| Suitable For Use With | : | 1 in W Type H Belt |
| Type | : | Arms/Spoke Type H-3 |
| Bore Diameter | : | 0.5 to 2.983 in |
| Bore Type | : | QD® Bushed |
| Outside Diameter | : | 19.0485 in |
| Number of Grooves | : | 120 |
| Pitch Diameter | : | 19.099 in |
| Face Width | : | 1-5/16 in |
