Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Seals, Gaskets & Packing
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Safety & Security
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Purvis Industries Specialty Products
- Abrasives
- Material Handling, Storage & Rigging
- Batteries & Accessories
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Roller Bearings
- Needle Roller Bearings
- Koyo NKJ20/20A
NKJ20/20A
Koyo NKJ20/20A Metric Series Caged Heavy Duty Needle Roller Bearing With Inner Ring, 20 mm Dia Bore, 32 mm OD, 20 mm W, 19.3 kN Dynamic/30.3 kN Static Load
- CP#:
- Item#: NKJ20/20A
- Mfr#: NKJ20/20A
- UPC: 605790218217
- Thick outer ring provides maximum load capacity and shock resistance with a relatively small radial cross section
- Optimum speed and lubrication-retention capability
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Koyo Needle Roller Bearing, Caged Heavy Duty, Series: NKJ Metric Series, 20 mm Bore, 32 mm OD, 20 mm Width, Open Closure, 19.3 kN Dynamic/30.3 kN Static Load, Steel Cage, 12000 rpm Grease/18000 rpm Oil Maximum, 250 deg F
SPECIFICATIONS
| Series | : | NKJ Metric Series |
| Load Capacity | : | 19.3 kN Dynamic/30.3 kN Static |
| Maximum Speed | : | 12000 rpm Grease/18000 rpm Oil |
| Outside Diameter | : | 32 mm |
| Width | : | 20 mm |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/729/Koyo_NATR10DZ_Catalog.pdf