Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Motor Controls & Drives
- Electric Motors
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Electrical
- Bushings
- Conveyors & Conveyor Parts
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Heating, Fans, Ventilation, Vacuum
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Roller Bearings
- Drawn Cup Roller Clutches
- Koyo FCS-35
FCS-35
Koyo FCS-35 Metric Series Caged Round Bore Drawn Cup Roller Clutch, 35 mm Dia Bore, 42 mm OD, 20 mm W, CW/CCW, 107 N-m Torque
- CP#:
- Item#: FCS-35
- Mfr#: FCS-35
- UPC: 605790185786
- For proper application, separate bearings are suggested to carry radial loads and assure concentricity between shaft and housing
- The clutch engages and when housing is rotated relatively to the shaft in the direction of arrow marking as labelled on the cup
- Shaft raceway and housing bore diameters that are necessary for proper mounting and operation are listed on the opposite page
- Compact, lightweight and operate directly on a hardened shaft
- Installation is easily accomplished with a simple press fit
- Best used for light duty torque applications that require a one way clutch
- FCS are clutches capable for rotational torque only
- A stainless steel spring is standard
- A hardened and machined shaft or an "IR" inner ring is required for optimal performance
- A press fit into the housing is required
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Drawn Cup Needle Roller Clutches are similar to drawn cup needle roller bearings in design, however, they allow free rotation in only one direction while transmitting torque in the opposite direction. These designs use the same small radial section as drawn cup needle roller bearings and are offered as clutch-only units or as clutch and bearing assemblies.
Koyo Drawn Cup Roller Clutch, Caged Round Bore, Series: FCS Metric Series, 35 mm Bore, 42 mm OD, 20 mm Width, CW/CCW Lock Direction, 107 N-m Torque, Steel Bearing, Polymer Cage, 6100 rpm Grease/6100 rpm Oil Maximum, -30 to 110 deg C
SPECIFICATIONS
| Series | : | FCS Metric Series |
| Bearing Material | : | Steel |
| Lock Direction | : | CW/CCW |
| Maximum Speed | : | 6100 rpm Grease/6100 rpm Oil |
| Outside Diameter | : | 42 mm |
| Torque Rating | : | 107 N-m |
| Width | : | 20 mm |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/1002/Koyo_AS1024_Catalog.pdf