Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
CRSBE-44
Koyo CRSBE-44 Inch Series Stud Type Uncaged Needle Bearing Track Roller With Eccentric Bushing, 2-3/4 in Dia x 1-1/2 in W Roller, 1 in Dia x 2-1/4 in L Stud
- CP#:
- Item#: CRSBE-44
- Mfr#: CRSBE-44
- UPC: 605790211492
- Non-separable, sealed unit with outer ring, full complement of needle rollers, stud seals, self-lubricating resin internal thrust washers and stud-fastened retaining washer
- Seals help retain lubricant and exclude foreign matter
- Hexagonal wrench socket in stud head for mounting
- Re-lubrication via axially drilled hole through stud with cross-drilled holes in stud raceway and shank
- Recessed axial hole accepts standard nominal inch drive-type grease lubrication fitting
- Lubrication fitting plugs furnished to close off unused holes
- Eccentric stud for radial adjustment of outer ring
- Tolerance limits for outer diameters of stud and outer ring refer to "single mean diameter"
- A close fit between stud and hole required for mounting
- Retaining washer should be firmly backed up by flat housing shoulder (perpendicular to the stud axis)
- Shoulder diameter should be atleast same size as minimum clamping diameter listed
- May be mounted with two thin lock nuts or nut and lock washer
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Track rollers (also known as cam followers) are characterized by their thick-walled outer rings that run directly on a track. The thick outer rings permit high load-carrying capability while minimizing both distortion and bending stresses. Sealed designs with internal thrust washers help extend service life under conditions of infrequent lubrication.
Koyo Needle Bearing Track Roller, Stud Type Uncaged, Series: CRSBE Inch Series, 2-3/4 in Roller Diameter, 1-1/2 in Roller Width, 1 in Stud Diameter, 2-1/4 in Stud Length, 1-14 Thread, 1-1/8 in Thread Length, 10000 lbf Dynamic/23400 lbf Static Load, 1400 rpm Grease Maximum, -25 to 225 deg F, Sealed Closure, Hex Wrench Socket Head, Black Oxide
SPECIFICATIONS
| Finish | : | Black Oxide |
| Series | : | CRSBE Inch Series |
| Head Type | : | Hex Wrench Socket |
| Load Capacity | : | 10000 lbf Dynamic/23400 lbf Static |
| Maximum Speed | : | 1400 rpm Grease |
| Roller Diameter | : | 2-3/4 in |
| Roller Width | : | 1-1/2 in |
| Stud Diameter | : | 1 in |
| Stud Length | : | 2-1/4 in |
| Thread Length | : | 1-1/8 in |
| Thread Size | : | 1-14 |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/729/Koyo_CR10_Catalog.pdf