Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
CRSB-10
Koyo CRSB-10 Inch Series Stud Type Uncaged Needle Bearing Track Roller, 5/8 in Dia x 0.406 in W Roller, 1/4 in Dia x 0.63 in L Stud, Steel Roller
- CP#:
- Item#: CRSB-10
- Mfr#: CRSB-10
- UPC: 605790194504
- Non-separable, sealed unit with outer ring, full complement of needle rollers, stud seals, self-lubricating resin internal thrust washers and stud-fastened retaining washer
- Seals help retain lubricant and exclude foreign matter
- Hexagonal wrench socket in stud head for mounting
- Re-lubrication via axially drilled hole through stud with cross-drilled holes in stud raceway and shank
- Recessed axial hole accepts standard nominal inch drive-type grease lubrication fitting
- Lubrication fitting plugs furnished to close off unused holes
- Tolerance limits for outer diameters of stud and outer ring refer to "single mean diameter"
- A close fit between stud and hole required for mounting
- Retaining washer should be firmly backed up by flat housing shoulder (perpendicular to the stud axis)
- Shoulder diameter should be atleast same size as minimum clamping diameter listed
- May be mounted with two thin lock nuts or nut and lock washer
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Track rollers (also known as cam followers) are characterized by their thick-walled outer rings that run directly on a track. The thick outer rings permit high load-carrying capability while minimizing both distortion and bending stresses. Sealed designs with internal thrust washers help extend service life under conditions of infrequent lubrication.
Koyo Needle Bearing Track Roller, Stud Type Uncaged, Series: CRSB Inch Series, 5/8 in Roller Diameter, 0.406 in Roller Width, 1/4 in Stud Diameter, 0.63 in Stud Length, 1/4-28 Thread, 5/16 in Thread Length, 994 lbf Dynamic/1370 lbf Static Load, 5500 rpm Grease Maximum, -25 to 225 deg F, Sealed Closure, Hex Wrench Socket Head, Steel Roller, Black Oxide
SPECIFICATIONS
| Finish | : | Black Oxide |
| Series | : | CRSB Inch Series |
| Head Type | : | Hex Wrench Socket |
| Load Capacity | : | 994 lbf Dynamic/1370 lbf Static |
| Maximum Speed | : | 5500 rpm Grease |
| Roller Diameter | : | 5/8 in |
| Roller Material | : | Steel |
| Roller Width | : | 0.406 in |
| Stud Diameter | : | 1/4 in |
| Stud Length | : | 0.63 in |
| Thread Length | : | 5/16 in |
| Thread Size | : | 1/4-28 |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/729/Koyo_CR10_Catalog.pdf