Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Seals, Gaskets & Packing
- Tools
- Tensioners & Idlers
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Safety & Security
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Purvis Industries Specialty Products
- Abrasives
- Material Handling, Storage & Rigging
- Tapes
- Batteries & Accessories
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
CR-8-1
Koyo CR-8-1 CR Inch Series Stud Type Uncaged Needle Bearing Track Roller, 1/2 in Dia x 3/8 in W Roller, 0.19 in Dia x 5/8 in L Stud
- CP#:
- Item#: CR-8-1
- Mfr#: CR-8-1
- UPC: 605790215575
- Screwdriver slot in head facilitates mounting
- Non-separable, sealed unit with outer ring, full complement of needle rollers, stud seals, self-lubricating resin internal thrust washers and stud-fastened retaining washer
- Re-lubrication via axially drilled hole through stud with cross-drilled holes in stud raceway and shank
- Recessed axial hole accepts standard nominal inch drive-type grease lubrication fitting
- Lubrication fitting plugs furnished to close off unused holes
- Tolerance limits for outer diameters of stud and outer ring refer to "single mean diameter"
- A close fit between stud and hole required for mounting
- Retaining washer should be firmly backed up by flat housing shoulder (perpendicular to the stud axis)
- Shoulder diameter should be atleast same size as minimum clamping diameter listed
- May be mounted with two thin lock nuts or nut and lock washer
- Without seal
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Track rollers (also known as cam followers) are characterized by their thick-walled outer rings that run directly on a track. The thick outer rings permit high load-carrying capability while minimizing both distortion and bending stresses.
Koyo Needle Bearing Track Roller, Stud Type Uncaged, Series: CR Inch Series, 1/2 in Roller Diameter, 3/8 in Roller Width, 0.19 in Stud Diameter, 5/8 in Stud Length, #10-32 Thread, 1/4 in Thread Length, 762 lbf Dynamic/731 lbf Static Load, 7000 rpm Grease Maximum, Black Oxide
SPECIFICATIONS
| Finish | : | Black Oxide |
| Series | : | CR Inch Series |
| Load Capacity | : | 762 lbf Dynamic/731 lbf Static |
| Maximum Speed | : | 7000 rpm Grease |
| Roller Diameter | : | 1/2 in |
| Roller Width | : | 3/8 in |
| Stud Diameter | : | 0.19 in |
| Stud Length | : | 5/8 in |
| Thread Length | : | 1/4 in |
| Thread Size | : | #10-32 |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/729/Koyo_CR10_Catalog.pdf