Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Seals, Gaskets & Packing
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Springs, Shock Absorbers, & Dampers
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Safety & Security
- Testing & Measuring
- Abrasives
- Purvis Industries Specialty Products
- Material Handling, Storage & Rigging
- Batteries & Accessories
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Roller Bearings
- Cylindrical Roller Bearings
- INA SL181852-E
SL181852-E
INA SL181852-E Full Complement Semi-Fixed Cylindrical Roller Bearing, 260 mm Dia Bore, 320 mm OD, 1 Row, 28 mm W, 530000 N Load
- CP#:
- Item#: SL181852-E
- Mfr#: SL181852-E
- UPC: 03537338610
- Bearing arrangements are subjected to particularly high radial loads
- Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position
- Bearing arrangements operating under the conditions described above must have very high rigidity
- Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing
- Very high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage
- Particularly space-saving designs are required despite very high load
- Semi-locating bearing function
- Increased capacity design
- Without cage
- 275000 N dynamic/530000 N static
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
In these bearings, the outer ring has one rigid rib and the inner ring has two rigid ribs. As a result, axial displacements of the shaft relative to the housing can be compensated within certain limits. The maximum axial displacement s is given in the product tables. Since the axial motion occurs without constraint in the bearing itself, this is practically free from friction with a rotating bearing. Cylindrical roller bearings of this design are used as semi-locating bearings, i.e. they can guide the shaft axially in one direction, while they act in the opposite direction as non-locating bearings.
INA Cylindrical Roller Bearing, Full Complement Semi-Fixed, Series: SL1818, 260 mm Bore, 320 mm OD, 1 Rows, 28 mm Width, 530000 N Load, 1080 rpm Maximum, -30 to 120 deg C
SPECIFICATIONS
| Series | : | SL1818 |
| Load Capacity | : | 530000 N |
| Maximum Speed | : | 1080 rpm |
| Outside Diameter | : | 320 mm |
| Number of Rows | : | 1 |
| Width | : | 28 mm |
DOCUMENTS
-
Warranty Information https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/INA_NIPA1_Warranty.pdf