Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Seals, Gaskets & Packing
- Tools
- Tensioners & Idlers
- Bushings
- Hardware
- Adhesives, Sealants & Lubrication
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Safety & Security
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Purvis Industries Specialty Products
- Abrasives
- Material Handling, Storage & Rigging
- Tapes
- Batteries & Accessories
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Belt, Sheaves & Pulleys
- Sheaves & Pulleys
- Round Belt Pulleys
- INA RSRD25-150-L0
RSRD25-150-L0
INA RSRD25-150-L0 Type D Belt Tension Pulley, 25 mm Dia Bore, 154 mm OD, 24 mm W Face
- CP#:
- Item#: RSRD25-150-L0
- Mfr#: RSRD25-150-L0
- UPC: 03537311182
- Increase the wrap angle in belt drives and can therefore support higher power levels or allow smaller units to be used
- Compensate for belt stretch resulting from operation
- Allow shorter center distances
- Reduce the wear on the belt drive
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
The ready-to-fit units comprise deep drawn, profiled sheet steel pulley halves riveted together and deep groove ball bearings. Pulleys of larger diameters are additionally welded together. A lead chamfer on the pulley profile prevents damage to the belt. Due to the sheet steel construction, the additional rotating masses and the out of balance masses generated are low.
INA Belt Tension Pulley, Type D, Series: RSRD-L0, 25 mm Bore, 154 mm OD, 24 mm Face Width, For Use With: Round Belts, Steel Cables and Hemp Ropes
SPECIFICATIONS
| Series | : | RSRD-L0 |
| Bore Diameter | : | 25 mm |
| Outside Diameter | : | 154 mm |
| Face Width | : | 24 mm |
| Type | : | Type D |
| Suitable For Use With | : | Round Belts, Steel Cables and Hemp Ropes |
DOCUMENTS
-
Warranty Information https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/INA_NIPA1_Warranty.pdf