Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Motor Controls & Drives
- Electric Motors
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Seals, Gaskets & Packing
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Electrical
- Bushings
- Conveyors & Conveyor Parts
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Heating, Fans, Ventilation, Vacuum
- Abrasives
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Purvis Industries Specialty Products
- Safety & Security
- Batteries & Accessories
- Material Handling, Storage & Rigging
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Roller Bearings
- Combination Roller Bearings
- INA NKX30-Z-XL
NKX30-Z-XL
INA NKX30-Z-XL Single Direction Needle Roller/Axial Deep Groove Ball Bearing With End Cap, 30 mm Dia Bore, 42 mm OD, 30 mm W, 36000 N Load
- CP#:
- Item#: NKX30-Z
- Mfr#: NKX30-Z-XL
- UPC: 03537339233
- The bearings can support high radial loads and moderate axial loads by means of a single bearing position
- Suitable for applications with a very small radial design envelope, where the raceway on the shaft is designed as a rolling bearing raceway
- Permit relatively high speeds, if the rolling element set in the axial bearing component is not full complement but guided by a cage
- High running accuracy
- Permit locating bearing arrangements with only a very small radial design envelope
- Result in axially rigid bearing arrangements
- Easy to mount as they are not self-retaining in many cases
- Permit technically straightforward, economical and cost-effective designs
- Without inner ring
- Z bearing with end cap, axial bearing component greased with lithium complex soap grease to GA08
- X-life design
- 25500 N dynamic/36000 N static radial, 20400 N dynamic/42000 N static axial
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
In bearings NKX..-Z, the rolling element set is not a full complement ball system, as is present in bearings NX, but is retained by a cage. The ball and cage assembly corresponds to an axial deep groove ball bearing of series 511. As a result of the cage, these bearings are suitable for higher speeds than bearings of the full complement design. Type NKX..-Z has a sheet steel end cap, which holds the axial bearing component together i.e. the bearings are self-retaining. The cap is designed without lubrication holes and is rigidly connected to the housing locating washer of the radial bearing component.
INA Needle Roller/Axial Deep Groove Ball Bearing, Single Direction, Series: NKX, 30 mm Bore, 42 mm OD, 30 mm Width, Open Closure, 36000 N Load, Sheet Steel Cage, 5000 rpm Maximum, -30 to 120 deg C
SPECIFICATIONS
| Series | : | NKX |
| Load Capacity | : | 36000 N |
| Maximum Speed | : | 5000 rpm |
| Outside Diameter | : | 42 mm |
| Width | : | 30 mm |
DOCUMENTS
-
Warranty Information https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/INA_NIPA1_Warranty.pdf