Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Linear Motion
- Chemicals
- Paints, Equipment & Supplies
- Fasteners
- Seals, Gaskets & Packing
- Tools
- Tensioners & Idlers
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Conveyors & Conveyor Parts
- Electrical
- Safety & Security
- Heating, Fans, Ventilation, Vacuum
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Purvis Industries Specialty Products
- Abrasives
- Material Handling, Storage & Rigging
- Tapes
- Batteries & Accessories
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Roller Bearings
- Needle Roller Bearings
- INA NK110/40-XL
NK110/40-XL
INA NK110/40-XL Needle Roller Bearing With Rib, 110 mm Dia Bore, 130 mm OD, 1 Row, 40 mm W, 290000 N Load
- CP#:
- Item#: NK110/40
- Mfr#: NK110/40-XL
- UPC: 03537308524
- The bearings can support high to very high radial forces
- Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
- Permit high speeds in spite of line contact
- Compensate misalignments between the shaft and housing
- Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
- Result in particularly compact, cost-effective and economical bearing arrangements
- Without inner ring
- X-life design
- 143000 N dynamic/290000 N static
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Needle roller bearings are rolling bearings with a low radial section height and high load carrying capacity, which are used as non-locating bearings and are part of the group of radial needle roller bearings. These bearings comprise machined outer rings, needle roller and cage assemblies and removable inner rings, i.e. they can be supplied with or without an inner ring in accordance with the application. In contrast to the outer cups of drawn cup needle roller bearings, which are produced by forming methods, the bearing rings are machined. Due to their non-locating bearing function, the bearings cannot guide the shaft axially in any direction.
INA Needle Roller Bearing, Series: Light NK, 110 mm Bore, 130 mm OD, 1 Rows, 40 mm Width, Open Closure, 290000 N Load, Sheet Steel Cage, 4200 rpm Maximum, -30 to 120 deg C
SPECIFICATIONS
| Series | : | Light NK |
| Load Capacity | : | 290000 N |
| Maximum Speed | : | 4200 rpm |
| Outside Diameter | : | 130 mm |
| Number of Rows | : | 1 |
| Width | : | 40 mm |
DOCUMENTS
-
Warranty Information https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/INA_NIPA1_Warranty.pdf