piwik image

Call Us: 800-580-5588

MENU

Products

Contact

Locations

Resources

Services

About

Purvis Industries

INA
Email Print

HK3026

INA HK3026 Drawn Cup Needle Roller Bearing With Open End, 30 mm Dia Bore, 37 mm OD, 1 Row, 26 mm W, 54000 N Load

  • Item#: HK3026
  • Mfr#: HK3026
  • UPC: 03537306391
  • The bearings are particularly suitable for applications with a very small radial section height on account of their very low cross-sectional height
  • Used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
  • Can support high radial loads
  • Require a considerably smaller radial design envelope than machined needle roller bearings
  • Usually run directly on the shaft
  • Permit relatively high speeds
  • Easy to mount
  • Require no additional means of axial retention
  • Can be readily used to close off the shaft ends of bearing positions
  • Result in particularly compact, cost-effective and economical bearing arrangements
  • 28000 N dynamic/54000 N static
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading

DESCRIPTION

Drawn cup needle roller bearings with open ends are supplied with a needle roller and cage assembly or a full complement needle roller set. Bearings with needle roller and cage assemblies allow higher speeds than the full complement designs.

INA Drawn Cup Needle Roller Bearing, Series: HK Series, 30 mm Bore, 37 mm OD, 1 Rows, 26 mm Width, Open Closure, 54000 N Load, Sheet Steel Cage, 8600 rpm Maximum, -30 to 140 deg C

SPECIFICATIONS

Series      :      HK Series
Load Capacity      :      54000 N
Maximum Speed      :      8600 rpm
Outside Diameter      :      37 mm
Number of Rows      :      1
Width      :      26 mm

DOCUMENTS