piwik image

Call Us: 800-580-5588

MENU

Products

Contact

Locations

Resources

Services

About

Purvis Industries

FAG NJ321-E-XL-M1
FAG
Email Print

NJ321-E-XL-M1

FAG NJ321-E-XL-M1 Separable Cylindrical Roller Bearing With Cage, 105 mm Dia Bore, 225 mm OD, 1 Row, 49 mm W, 495000 N Load

  • Item#: NJ321-E-XL-M1 FAG
  • Mfr#: NJ321-E-XL-M1
    • Bearing arrangements are subjected to very high radial loads
    • Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position
    • Bearing arrangements must have very high rigidity
    • Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing
    • High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
    • Semi-locating bearing function
    • Increased capacity design
    • X-life design
    • Solid brass cage, two-piece, roller-guided
    • 495000 N dynamic/470000 N static
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading

DESCRIPTION

Bearings of type NJ have two rigid ribs on the outer ring and one rigid rib on the inner ring. With these cylindrical roller bearings, axial displacements of the shaft relative to the housing are possible in one direction only. The maximum axial displacement s is given in the product tables. Bearings of type NJ are used as semi-locating bearings, i.e. they can guide the shaft axially in one direction. Semi-locating bearings NJ can be combined with an L-section ring HJ to form a locating bearing unit.

FAG Cylindrical Roller Bearing, Separable, Series: NJ3-E, 105 mm Bore, 225 mm OD, 1 Rows, 49 mm Width, 495000 N Load, Solid Brass Cage, 4550 rpm Maximum, -30 to 150 deg C

SPECIFICATIONS

Series      :      NJ3-E
Load Capacity      :      495000 N
Maximum Speed      :      4550 rpm
Outside Diameter      :      225 mm
Number of Rows      :      1
Width      :      49 mm