Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Seals, Gaskets & Packing
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Safety & Security
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Purvis Industries Specialty Products
- Abrasives
- Material Handling, Storage & Rigging
- Batteries & Accessories
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Bearings
- Insert Bearings & Cartridges
- Ball Insert Bearings
- Fafnir® SM1207KS
SM1207KS
Timken® Fafnir® SM1207KS SM-S Standard Duty Ball Insert Bearing Housed Unit, 2-7/16 in Dia Bore, 4.7244 in Dia Outside, 1 Rows, 2-7/16 in W, 13100 lb Dynamic/8080 lb Static Load
- CP#:
- Item#: SM1207KS
- Mfr#: SM1207KS
- UPC: 087796056138
- Standard SM-S series permits the inner assembly to swivel in the outer aligning ring
- The unrestricted self-alignment is achieved by allowing the inner-ring to become square and true with the shaft and assembly
- The external S-ring is uniquely ground and closely matched to its respective outer-bearing ring
- The s-ring of one bearing will not fit the outer-ring of another bearing
- The bearings are not pre-lubricated
- Eccentric wide-inner-ring
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. When set screws are used, Timken® suggests using shaftguarding Technology™, a stainless-steel, hardened band that is inserted in a groove on the inner ring. When the set screws are tightened, they press against the band, tightening the grip on the shaft. Unlike traditional set screws, which can dig into the shaft, there are no nicks, raised metal or permanent shaft damage. The stainless band resists the formation of corrosion on the shaft.
Timken® Fafnir®, SM1207KS, Ball Insert Bearing Housed Unit, Standard Duty, Series: SM-S, 2-7/16 in Bore, 4.7244 in OD, 1 Rows, 2-7/16 in Width, Open Closure, 13100 lb Dynamic/8080 lb Static Load, Steel Bearing, 3530 rpm Maximum, Uncoated
SPECIFICATIONS
| Series | : | SM-S |
| Bearing Material | : | Steel |
| Closure Type | : | Open |
| Finish | : | Uncoated |
| Load Capacity | : | 13100 lb Dynamic/8080 lb Static |
| Maximum Speed | : | 3530 rpm |
| Outside Diameter | : | 4.7244 in |
| Number of Rows | : | 1 |
| Inside Diameter | : | 2-7/16 in |
| Measurement System | : | Imperial |
| Width | : | 2-7/16 in |
DOCUMENTS
-
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_1012KRRB_Catalog.pdf