Locations
Dodge®
134207
3 15/16 SSL PLXC PILLOW BLOCK
- Item#: 134207DOD
- Mfr#: 134207
- UPC: 78247595398
- Fully split housing for trouble-free assembly and disassembly
- Rugged construction using gray iron housing and liner for durability
- Babbitt lining offers conformability and shaft protection
- Completely self-aligning as a result of ball and socket mounting between liner and base
- Dependable oil ring lubrication with self-contained oil supply
- Convenient oil gage can be positioned on either side of housing
- Proven reliability and dependable performance guard against catastrophic failures
- Extended life is a plus with no metal-to-metal contact during operation
- High speed capabilities because of self-pressurized full oil film
- Adequate vibration dampening is handled by the hydrodynamic oil film which absorbs shock
- Effective heat transfer accomplished by journal surrounded by improved coolant chambers
- Quiet operation accomplished by full separation of mating parts
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Though originally designed for the exacting requirements of the air handling industry, R series Sleevoil® pillow blocks are suitable for a wide range of industrial applications where a precision built, split, babbitted, ring-oiled bearing is required which is self aligning and quiet in operation. Sleevoil® pillow blocks have good cooling capabilities. Water Cooled (WC) and Externally Cooled (XC) types operate at higher speeds and load ranges than plain units and function well near high temperature sources.
Dodge® Sleevoil® Pillow Block Bearing, Series: R Short, 3-15/16 in Bore, Plain Externally Cooled Coolant, 14-1/4 to 15-3/4 in Bolt Center-to-Center Length, 5-3/4 in Base to Bore Centerline, 8 in Liner Length, Expansion Bearing Expansion, 180 deg F, Cast Iron, 19 in L x 11 in W x 11-15/16 in H
SPECIFICATIONS
| Base to Bore Centerline | : | 5-3/4 in |
| Type | : | Hydrodynamic |
| Bolt Center-to-Center Length | : | 14-1/4 to 15-3/4 in |
| Series | : | R Short |
| Coolant Type | : | Plain Externally Cooled |
| Dimensions | : | 19 in L x 11 in W x 11-15/16 in H |
| Expansion Type | : | Expansion Bearing |
| Liner Length | : | 8 in |
| Material | : | Cast Iron |
| Inside Diameter | : | 3-15/16 in |
| Mounted | : | Yes |
| Temperature Rating | : | 180 deg F |
