Purvis Industries

B6

Dixon® B6 Boss™ Ground Joint Washer Seal Stem, 3/4 in, Hose Shank x NPT, Steel, Domestic

• CP#:
• Item#: B6DIX
• Mfr#: B6

• The stem part that is clamped to the hose is one part of the boss washer seal connection
• The boss washer seal spud part of the coupling serves as the other half of the connection and is usually fixed to the equipment
• The two halves are connected or disconnected by rotating the wing nut on the spud
• A Leakproof seal forms by rotating the wing nut and hammering it tight
• Easy to seal
• Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
• Use with Boss™ clamps
• A Klingersil C-4401 washer is inserted between the stem and spud
• Recommended for steam service up to 450 deg F
• Worn-out hose couplings can be dangerous
• They should be checked regularly and replace when necessary
• Each coupling user should review applications and add safety devices where indicated
• Note: pressurized steam is an extremely dangerous commodity
• Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
• Always follow the manufacturer's product recommendations for pressurized steam handling
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

• Add To Cart

• 
• Add Custom Part Number

• Add to Product List