Products
- Gear Reducers & Gearmotors
- Bearings
- Belt, Sheaves & Pulleys
- Chains & Sprockets
- Couplings
- Electric Motors
- Motor Controls & Drives
- Pneumatics
- Hydraulics
- Clutches & Brakes
- Pipe, Tube, Hose & Fittings
- Gears
- Industrial Automation
- Chemicals
- Linear Motion
- Paints, Equipment & Supplies
- Fasteners
- Seals, Gaskets & Packing
- Tensioners & Idlers
- Tools
- Hardware
- Adhesives, Sealants & Lubrication
- Bushings
- Conveyors & Conveyor Parts
- Electrical
- Heating, Fans, Ventilation, Vacuum
- Springs, Shock Absorbers, & Dampers
- Testing & Measuring
- Safety & Security
- Fleet & Vehicle Maintenance
- Janitorial & Facility Maintenance
- Purvis Industries Specialty Products
- Abrasives
- Material Handling, Storage & Rigging
- Batteries & Accessories
- Tapes
- Clamping, Workholding & Positioning
- Lawn, Garden & Outdoor Equipment
Contact
Locations
Services
Purvis Industries
Locations
- Home
- Products
- Seals, Gaskets & Packing
- Shaft Sealing Devices
- V-Seals
- CR Seals® 400204
400204
CR Seals® 400204 Type VR1 V-Ring Seal, 0.7087 in ID x 1.22 in OD x 0.24 in W, 0.748 to 0.8268 in Dia Shaft, FKM
- CP#:
- Item#: 400204CR
- Mfr#: 400204
- UPC: 085311044103
- V-ring consists of a seal body, flexible and conical-shaped sealing lip and an integral, resilient hinge
- It is stretched and installed directly on the shaft, where it is held in place by the inherent tension of the seal body
- It rotates with the shaft and seals axially against a stationary counter face
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
V-ring seals (or V-rings) are unique all-rubber seals for rotating shafts and are used in an extremely wide range of applications. The V-ring can be used alone to protect a wide assortment of bearing types from contaminants. They are also often used as secondary seals to protect primary seals in highly contaminated environments.
CR Seals® V-Ring Seal, Type VR1, 0.7087 in ID, 1.22 in OD, 0.24 in Width, 0.748 to 0.8268 in Shaft Diameter, 1600 fpm Speed, 5 deg at 3000 fpm/1 to 4 deg at 2400 fpm Misalignment, -40 to 225 deg F, 10 psi Pressure, FKM
SPECIFICATIONS
| Misalignment | : | 5 deg at 3000 fpm/1 to 4 deg at 2400 fpm |
| Pressure Rating | : | 10 psi |
| Speed | : | 1600 fpm |
| Temperature Rating | : | -40 to 225 deg F |
| Type | : | Type VR1 |
| Inside Diameter | : | 0.7087 in |
| Outside Diameter | : | 1.22 in |
| Width | : | 0.24 in |
| Shaft Diameter Range | : | 0.748 to 0.8268 in |
| Material | : | FKM |
DOCUMENTS
-
Specification Sheet https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/586/SKF_400204_Specification_Sheet.pdf -
Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/https://econtent.adhq.com/dam/Original/768/SKF_524371_Catalog.pdf