Clesco F2PS-BL-075 1-Piece Self-Aligning Standard Flange Mount Ball Bearing Unit, 3/4 in Dia Bore, 3-3/8 in L Bolt Center-to-Center, 2-Bolt Flange Mount, 4-1/2 in OAL/Dia
Flange Mount Bearings are bearing units contained inside a housing unit. The housing provides a rigid and secure position while allowing the bearing unit to rotate within a clean, contained environment. The housing is bolted to a foundation allowing the outer ring of the bearing to remain stationary while the inner ring rotates. Housed bearings are most commonly used in light duty applications.
Clesco Flange Mount Ball Bearing Unit, 1-Piece Self-Aligning Standard, Series: F2PS-BL, 3/4 in Bore, 3-3/8 in Bolt Center-to-Center Length, 2-Bolt Flange Mounting, 4-1/2 in Overall Length/Diameter, 1-1/8 in Overall Depth, 2-1/2 in Overall Height, Set Screw Locking Device, Neoprene Seal, 2877 lb Load, 4500 rpm Maximum, -30 to 200 deg F, Zinc Plated
Bolt Center-to-Center Length | : | 3-3/8 in |
Finish | : | Zinc Plated |
Flange Mounting Type | : | 2-Bolt |
Locking Device | : | Set Screw |
Load Capacity | : | 2877 lb |
Maximum Speed | : | 4500 rpm |
Overall Depth | : | 1-1/8 in |
Overall Height | : | 2-1/2 in |
Inside Diameter | : | 3/4 in |
Overall Length/Diameter | : | 4-1/2 in |
Mounted | : | Yes |
Seal Material | : | Neoprene |
Measurement System | : | Imperial |
Temperature Rating | : | -30 to 200 deg F |