piwik image

Call Us: 800-580-5588

MENU

Products

Contact

Locations

Resources

Services

About

Purvis Industries

Browning® NSS10H50
Browning®

Browning® NSS10H50

loading
Browning® NSS10H50
Browning®
Email Print

NSS10H50

Browning® 1213925 Type 7 Spur Gear With Type H Split Taper® Bushing, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 50 Teeth, 5 in Dia Pitch, 3/8 to 1-1/2 in Dia Bore, Steel

  • Item#: NSS10H50-P01
  • Mfr#: NSS10H50
    • Browning® Split-Taper® bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
    • Browning® bushed gears hold the shaft with clamp fit and eliminate costly reworking on replacement gears
    • Less expensive
    • Without hardened teeth
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading

DESCRIPTION

Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.

Browning® Spur Gear, Type 7, 3/8 to 1-1/2 in Bore, 5.2 in OD, 1:1 Gear Ratio, 50 Teeth, 10 Diametral Pitch, 5 in Pitch Diameter, 1 in Face Width, 2-1/2 in Diameter Hub, 7/16 in Hub Projection, 1-5/8 in Overall Length, 14.5 deg Pressure Angle, 1/4 x 1/8, 3/16 x 3/32, 5/16 x 5/32, 1/8 x 1/16 in Keyway, Steel

SPECIFICATIONS

Gear Ratio      :      1:1
Hub Diameter      :      2-1/2 in
Hub Projection      :      7/16 in
Keyway Size      :      1/4 x 1/8, 3/16 x 3/32, 5/16 x 5/32, 1/8 x 1/16 in
Outside Diameter      :      5.2 in
Overall Length      :      1-5/8 in
Type      :      Type 7
Diametral Pitch      :      10
Pressure Angle      :      14.5 deg
Face Width      :      1 in
Number of Teeth      :      50
Pitch Diameter      :      5 in
Bore Diameter      :      3/8 to 1-1/2 in
Material      :      Steel