Locations
Timken®
RAS1 1/2
Timken® RAS1 1/2 Normal Duty Pillow Block Ball Bearing Unit, 1-1/2 in Dia Bore, 5.374 in L Bolt Center-to-Center, 1.937 in Base to Bore Centerline, 7.063 in OAL x 4 in OAH
- Item#: RAS1 1/2
- Mfr#: RAS1 1/2
- UPC: 087796059580
- Heavier than our standard block with solid, flat feet for increased strength
- The RAS pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings
- All units are supplied with self-locking collar
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.
Timken® Pillow Block Ball Bearing Unit, Normal Duty, Series: RAS, 1-1/2 in Bore, 5.374 in Bolt Center-to-Center Length, 1.937 in Base to Bore Centerline, 7.063 in Overall Length, 2-7/32 in Overall Width, 4 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.031 in Base Width, Eccentric Collar Locking Device, Shroud Seal, Non-Expansion (Fixed), 8100 lb Dynamic/4400 lb Static Load, 250 deg F, 3500 rpm Maximum, Cast Iron, Uncoated
SPECIFICATIONS
| Base Width | : | 2.031 in |
| Bore Type | : | Round |
| Expansion Type | : | Non-Expansion (Fixed) |
| Finish | : | Uncoated |
| Load Capacity | : | 8100 lb Dynamic/4400 lb Static |
| Locking Device | : | Eccentric Collar |
| Material | : | Cast Iron |
| Maximum Speed | : | 3500 rpm |
| Mounting Type | : | Two-Bolt Base |
| Overall Width | : | 2-7/32 in |
| Seal Type | : | Seal Type Seal Type |
| Series | : | RAS |
| Temperature Rating | : | 250 deg F |
| Type | : | Normal Duty |
| Bore Diameter | : | 1-1/2 in |
| Bolt Center-to-Center Length | : | 5.374 in |
| Base to Bore Centerline | : | 1.937 in |
| Overall Length | : | 7.063 in |
| Overall Height | : | 4 in |
