piwik image

Timken® QVVP12V055SM

Timken® QVVP12V055SM



TimkenĀ® QVVP12V055SM Extreme Heavy Duty Solid Block Type E Pillow Block Spherical Roller Bearing Unit, 55 mm Dia Bore, 165.1 to 200.2 mm L Bolt Center-to-Center, 63.5 mm Base to Bore Centerline, 244.6 mm OAL x 133.4 mm OAH

  • Item#: QVVP12V055SM
  • Mfr#: QVVP12V055SM
  • UPC: 883450032483
  • Patented V-Lock® mechanism evenly distributes force on the shaft, helping eliminate fretting corrosion
  • Maximum holding power and prevention of overtightening
  • Reliable mechanical withdraw
  • Preset spherical inner ring radial internal clearances
  • Quick installation
  • Double row bearing
  • 22212 bearing insert bore series
  • Works well with high-speed applications where shaft centering is an issue
  • Double nut facilitates the withdraw of the unit from the shaft
  • Triple-lip contacting, self-purging nitrile rubber seal is excellent in moist and dirty applications, chemical and corrosion-resistant
  • Bearing steel
  • Open end type
  • 360 deg shaft holding
  • Designed to eliminate over-tightening
  • Mechanical withdrawal for easier removal
  • Larger bearings and higher load rating compared to competitive products having same bore size
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Timken® solid block mounted spherical roller bearings (housed units) feature high-performance, low operating temperature Timken® double row spherical roller bearings, cast steel housings, unique locking and sealing design options to offer protection against contaminants in the harshest environments. Timken® spherical roller bearings are ideal for handling high radial loads.

Timken® Pillow Block Spherical Roller Bearing Unit, Extreme Heavy Duty Solid Block Type E, 55 mm Bore, 165.1 to 200.2 mm Bolt Center-to-Center Length, 63.5 mm Base to Bore Centerline, 244.6 mm Overall Length, 102.1 mm Overall Width, 133.4 mm Overall Height, Two-Bolt Base Mounting, Tapered Bore, 66.8 mm Base Width, Double V-Lock® Locking Device, Triple Lip M Seal, Non-Expansion (Fixed) Expansion, 169 kN Dynamic/174 kN Static Load, 2000 rpm Maximum, Cast Steel, Powder Coated


Base Width      :      66.8 mm
Bore Type      :      Tapered
Expansion Type      :      Non-Expansion (Fixed)
Finish      :      Powder Coated
Load Capacity      :      169 kN Dynamic/174 kN Static
Locking Device      :      Double V-Lock®
Material      :      Cast Steel
Maximum Speed      :      2000 rpm
Mounting Type      :      Two-Bolt Base
Overall Width      :      102.1 mm
Seal Type      :      Seal Type Seal Type
Type      :      Extreme Heavy Duty Solid Block Type E
Bore Diameter      :      55 mm
Bolt Center-to-Center Length      :      165.1 to 200.2 mm
Base to Bore Centerline      :      63.5 mm
Overall Length      :      244.6 mm
Overall Height      :      133.4 mm


  • pdf