Locations
Timken®
QAPR13A207ST
Timken® QAPR13A207ST Heavy Duty Solid Block Type E Pillow Block Spherical Roller Bearing Unit, 2-7/16 in Dia Bore, 7.13 to 8.75 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/4 in OAL x 5.8 in OAH
- Item#: QAPR13A207ST
- Mfr#: QAPR13A207ST
- UPC: 883450048682
- Concentric locking collar with two set screws at 60 degrees to provide maximum positive locking power with minimal run out
- Double collared insert provides double the holding power compared to our standard single collared insert
- Bearing steel
- Open end type
- Double row bearing
- 22213 bearing insert bore series
- Simple installation
- Minimal runout
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Timken® solid block mounted spherical roller bearings (housed units) feature high-performance, low operating temperature Timken® double row spherical roller bearings, cast steel housings, unique locking and sealing design options to offer protection against contaminants in the harshest environments. Timken® spherical roller bearings are ideal for handling high radial loads.
Timken® Pillow Block Spherical Roller Bearing Unit, Heavy Duty Solid Block Type E, 2-7/16 in Bore, 7.13 to 8.75 in Bolt Center-to-Center Length, 2-3/4 in Base to Bore Centerline, 10-1/4 in Overall Length, 3.77 in Overall Width, 5.8 in Overall Height, Four-Bolt Base Mounting, Cylindrical Bore, 3-1/4 in Base Width, Single Concentric Collar Locking Device, Labyrinth T Seal, Non-Expansion (Fixed), 46400 lb Dynamic/48600 lb Static Load, 2800 rpm Grease/3200 rpm Oil Maximum, Cast Steel, Powder Coated
SPECIFICATIONS
| Base Width | : | 3-1/4 in |
| Bore Type | : | Cylindrical |
| Expansion Type | : | Non-Expansion (Fixed) |
| Finish | : | Powder Coated |
| Load Capacity | : | 46400 lb Dynamic/48600 lb Static |
| Locking Device | : | Single Concentric Collar |
| Material | : | Cast Steel |
| Maximum Speed | : | 2800 rpm Grease/3200 rpm Oil |
| Mounting Type | : | Four-Bolt Base |
| Overall Width | : | 3.77 in |
| Seal Type | : | Labyrinth T |
| Type | : | Heavy Duty Solid Block Type E |
| Bore Diameter | : | 2-7/16 in |
| Bolt Center-to-Center Length | : | 7.13 to 8.75 in |
| Base to Bore Centerline | : | 2-3/4 in |
| Overall Length | : | 10-1/4 in |
| Overall Height | : | 5.8 in |
