Locations
Timken®
QAPL20A100SM
Timken® QAPL20A100SM Heavy Duty S2000 Style Solid Block Pillow Block Spherical Roller Bearing Unit, 100 mm Dia Bore, 255 to 320 mm L Bolt Center-to-Center, 108 mm Base to Bore Centerline, 362 mm OAL x 212.9 mm OAH
- Item#: QAPL20A100SM
- Mfr#: QAPL20A100SM
- UPC: 883450298889
- Concentric locking collar with two set screws at 60 degrees to provide maximum positive locking power with minimal run out
- Double collared insert provides double the holding power compared to our standard single collared insert
- Triple-lip contacting, self-purging nitrile rubber seal is excellent in moist and dirty applications, chemical and corrosion resistant
- Bearing steel
- Open end type
- Double row bearing
- 22220 bearing insert bore series
- Simple installation
- Minimal runout
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Timken® solid block mounted spherical roller bearings (housed units) feature high-performance, low operating temperature Timken® double row spherical roller bearings, cast steel housings, unique locking and sealing design options to offer protection against contaminants in the harshest environments. Timken® spherical roller bearings are ideal for handling high radial loads.
Timken® Pillow Block Spherical Roller Bearing Unit, Heavy Duty S2000 Style Solid Block, 100 mm Bore, 255 to 320 mm Bolt Center-to-Center Length, 108 mm Base to Bore Centerline, 362 mm Overall Length, 122.9 mm Overall Width, 212.9 mm Overall Height, Two-Bolt Base Mounting, Cylindrical Bore, 94.7 mm Base Width, Single Concentric Collar Locking Device, Triple Lip M Seal, Non-Expansion (Fixed) Expansion, 435 kN Dynamic/502 kN Static Load, 1200 rpm Maximum, Cast Steel, Powder Coated
SPECIFICATIONS
| Base Width | : | 94.7 mm |
| Bore Type | : | Cylindrical |
| Expansion Type | : | Non-Expansion (Fixed) |
| Finish | : | Powder Coated |
| Load Capacity | : | 435 kN Dynamic/502 kN Static |
| Locking Device | : | Single Concentric Collar |
| Material | : | Cast Steel |
| Maximum Speed | : | 1200 rpm |
| Mounting Type | : | Two-Bolt Base |
| Overall Width | : | 122.9 mm |
| Seal Type | : | Seal Type Seal Type |
| Type | : | Heavy Duty S2000 Style Solid Block |
| Bore Diameter | : | 100 mm |
| Bolt Center-to-Center Length | : | 255 to 320 mm |
| Base to Bore Centerline | : | 108 mm |
| Overall Length | : | 362 mm |
| Overall Height | : | 212.9 mm |
