piwik image

Timken® QAP15A215STNG

Timken® QAP15A215STNG



TimkenĀ® QAP15A215STNG Heavy Duty Solid Block Type E Pillow Block Spherical Roller Bearing Unit, 2-15/16 in Dia Bore, 7.88 to 9.63 in L Bolt Center-to-Center, 3.13 in Base to Bore Centerline, 11.63 in OAL x 6.47 in OAH

  • Item#: QAP15A215STNG
  • Mfr#: QAP15A215STNG
  • UPC: 883450500180
  • Concentric locking collar with two set screws at 60 degrees to provide maximum positive locking power with minimal run out
  • Double collared insert provides double the holding power compared to our standard single collared insert
  • No grease
  • Bearing steel
  • Double row bearing
  • 22215 bearing insert bore series
  • Open end type
  • Simple installation
  • Minimal runout
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Timken® solid block mounted spherical roller bearings (housed units) feature high-performance, low operating temperature Timken® double row spherical roller bearings, cast steel housings, unique locking and sealing design options to offer protection against contaminants in the harshest environments. Timken® spherical roller bearings are ideal for handling high radial loads.

Timken® Pillow Block Spherical Roller Bearing Unit, Heavy Duty Solid Block Type E, 2-15/16 in Bore Dia, 7.88 to 9.63 in Bolt Center-to-Center Length, 3.13 in Base to Bore Centerline, 11.63 in Overall Length, 3.87 in Overall Width, 6.47 in Overall Height, 2-Bolt Base Mount, Cylindrical Bore, 3 in Base Width, Single Concentric Collar Locking Device, Labyrinth T Seal, Expansion Type: Non-Expansion Bearing (Fixed), 49900 lb Dynamic/54100 lb Static, 2400 rpm Grease/2900 rpm Oil Maximum, Cast Steel, Powder Coated


Base Width      :      3 in
Base to Bore Centerline      :      3.13 in
Bolt Center-to-Center Length      :      7.88 to 9.63 in
Mounting Type      :      Two-Bolt Base
Expansion Type      :      Non-Expansion (Fixed)
Locking Device      :      Single Concentric Collar
Finish      :      Powder Coated
Overall Length      :      11.63 in
Bore Type      :      Cylindrical
Load Capacity      :      49900 lb Dynamic/54100 lb Static
Material      :      Cast Steel
Maximum Speed      :      2400 rpm Grease/2900 rpm Oil
Overall Width      :      3.87 in
Bore Diameter      :      2-15/16 in
Mounted      :      Yes
Overall Height      :      6.47 in
Seal Type      :      Seal Type Seal Type
Type      :      Heavy Duty Solid Block Type E


  • pdf