Locations
Timken®
QAAPL15A212SM
Timken® QAAPL15A212SM Extra Heavy Duty S2000 Style Solid Block Pillow Block Spherical Roller Bearing Unit, 2-3/4 in Dia Bore, 7.7 to 8.4 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 10.44 in OAL x 6.59 in OAH
- Item#: QAAPL15A212SM
- Mfr#: QAAPL15A212SM
- UPC: 883450321013
- Concentric locking collar with two set screws at 60 degrees to provide maximum positive locking power with minimal run out
- Double collared insert provides double the holding power compared to our standard single collared insert
- Triple-lip contacting, self-purging nitrile rubber seal is excellent in moist and dirty applications, chemical and corrosion resistant
- Bearing steel
- Open end type
- Double row bearing
- 22215 bearing insert bore series
- Simple installation
- Increased holding power
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Timken® solid block mounted spherical roller bearings (housed units) feature high-performance, low operating temperature Timken® double row spherical roller bearings, cast steel housings, unique locking and sealing design options to offer protection against contaminants in the harshest environments. Timken® spherical roller bearings are ideal for handling high radial loads.
Timken® Pillow Block Spherical Roller Bearing Unit, Extra Heavy Duty S2000 Style Solid Block, 2-3/4 in Bore, 7.7 to 8.4 in Bolt Center-to-Center Length, 3-1/4 in Base to Bore Centerline, 10.44 in Overall Length, 4.74 in Overall Width, 6.59 in Overall Height, Two-Bolt Base Mounting, Cylindrical Bore, 3 in Base Width, Double Concentric Collar Locking Device, Triple Lip M Seal, Non-Expansion (Fixed) Expansion, 49900 lb Dynamic/54100 lb Static Load, 1600 rpm Maximum, Cast Steel, Powder Coated
SPECIFICATIONS
| Base Width | : | 3 in |
| Bore Type | : | Cylindrical |
| Expansion Type | : | Non-Expansion (Fixed) |
| Finish | : | Powder Coated |
| Load Capacity | : | 49900 lb Dynamic/54100 lb Static |
| Locking Device | : | Double Concentric Collar |
| Material | : | Cast Steel |
| Maximum Speed | : | 1600 rpm |
| Mounting Type | : | Two-Bolt Base |
| Overall Width | : | 4.74 in |
| Seal Type | : | Triple Lip M |
| Type | : | Extra Heavy Duty S2000 Style Solid Block |
| Bore Diameter | : | 2-3/4 in |
| Bolt Center-to-Center Length | : | 7.7 to 8.4 in |
| Base to Bore Centerline | : | 3-1/4 in |
| Overall Length | : | 10.44 in |
| Overall Height | : | 6.59 in |
