Locations
Timken®
NJ338EMA
Timken® NJ338EMA Enhanced Geometry Type NJ Radial Cylindrical Roller Bearing, 190 mm Dia Bore, 400 mm OD, Single Rows, 78 mm W, 1300 kN Dynamic/1500 kN Static Load
- Item#: NJ338EMA
- Mfr#: NJ338EMA
- UPC: 053893773896
- Single-piece, land-riding, machined-brass cage
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
A radial cylindrical roller bearing consists of an inner and/or outer ring and a complement of controlled-contour cylindrical rollers. Depending on the style of bearing, either the inner or the outer ring will have two roller-guiding ribs. The other ring, separable from the assembly, has one rib or none. The ring with two ribs axially locates the position of the roller assembly. The diameters of these ribs may be used to support the roller. One of the ribs may carry light thrust loads when an opposing rib is provided in the mating ring.
Timken® Radial Cylindrical Roller Bearing, Enhanced Geometry Type NJ, 190 mm Bore Dia, 400 mm Outside Dia, Single Rows, 78 mm Width, 1300 kN Dynamic/1500 kN Static, Brass Cage, 1300 rpm Grease/1500 rpm Oil Maximum, 302 deg F
SPECIFICATIONS
| Cage Material | : | Brass |
| Maximum Speed | : | 1300 rpm Grease/1500 rpm Oil |
| Temperature Rating | : | 302 deg F |
| Type | : | Enhanced Geometry Type NJ |
| Bore Diameter | : | 190 mm |
| Outside Diameter | : | 400 mm |
| Number of Rows | : | Single |
| Width | : | 78 mm |
| Load Capacity | : | 1300 kN Dynamic/1500 kN Static |
