piwik image

Thomson® SRA8SS CTL

Thomson® SRA8SS CTL



ThomsonĀ® 60 CaseĀ® SRA8SS CTL Predrilled Plain Shaft Support Assembly, 1/2 in Nominal, L Class, 24 in L, 1-1/2 in Rail

  • Item#: SRA8SS CTL
  • Mfr#: SRA8SS CTL
  • Lightweight, high-strength aluminum alloy rail
  • Standard profile design, cut to length
  • Supports can be used horizontally or vertically
  • Bolt down from top through the flange
  • For continuously supported applications
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Assemblies are supplied cut to any length with no limit on the overall length (long lengths are butt jointed together unless specified otherwise). Either solid or lightweight tubular shafting can be assembled to the standard Thomson® support rails, which come with base mounting holes spaced evenly along the overall length of the assembly. The LSRA uses a special shaft unlike the LSR-PD. The attachment bolts for the LSRA are from the top down so you can easily mount into a machine base plate. The LSRA bolt pattern closely matches profile rail linear guides and can easily be used as a drop-in substitute to replace linear guides (ensure you review loading requirements). Corrosion-resistant lower support rail assemblies (LSRA) are available. The support is zinc plated and shaft is 440C.

Thomson® 60 Case® Shaft Support Assembly, Predrilled Plain, 1/2 in Nominal, 24 in Length, 1/2 in Shaft Dia, Class: L, 1-1/2 in Rail, 4 in, 2 in Mounting Hole To Edge, For Use With: RoundRail™ Linear Guide


Mounting Hole Center to Center      :      4 in
Mounting Hole to Edge      :      2 in
Shaft Diameter      :      1/2 in
Suitable For Use With      :      RoundRail™ Linear Guide
Type      :      Predrilled Plain
Nominal Size      :      1/2 in
Class      :      L
Length      :      24 in
Rail Size      :      1-1/2 in


  • pdf