piwik image


NTN R16LLU Micro Round Bore Miniature Extra Small Radial Ball Bearing, 25.4 mm Dia Bore, 50.8 mm OD, 1 Rows, 12.7 mm W, 7750 N Load

  • Item#: R16LLU
  • Mfr#: R16LLU
  • UPC: 4547359496222
  • The seal edge forms a double-lip
  • The inner lip touches the V-slot side of the inner rings seal surface
  • There is a slight gap between the inner ring and the outer lip which produces the labyrinth effect
  • Even if friction causes the inner lip to wear, the outer lip constricts around the inner ring to compensate, and thus constantly preserving the perfect sealing effect
  • Due to the fact that it is a contact type seal bearing, the torque will be a little greater but the seal will provide the optimum protection from dust penetration
  • Contact type rubber seal
  • Normal clearance
  • ISO class 0 precision rating
  • 7750 N dynamic/5200 N static
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Single Row Radial Ball Bearings are the most widely used bearings and utilize an uninterrupted raceway, which makes these bearings suitable for radial loads, or a combination of thrust and radial loads. This design permits precision tolerances even at high speed operation. The cage in this bearing is pressed steel. For high speed bearings, machined brass cages are available. Bearings with locating snap rings are also available.

NTN Radial Ball Bearing, Round Bore Miniature Extra Small, Series: Micro, 25.4 mm Bore, 50.8 mm OD, 1 Rows, 12.7 mm Width, Double Seal Closure, 7750 N Load, High Carbon Chrome Steel Bearing, Nitrile Rubber Seal, Pressed Steel Cage, 8700 rpm Grease Maximum, -40 to 120 deg C


Bearing Material      :      High Carbon Chrome Steel
Cage Material      :      Pressed Steel
Closure Type      :      Double Seal
Maximum Speed      :      8700 rpm Grease
Seal Material      :      Nitrile Rubber
Series      :      Micro
Temperature Rating      :      -40 to 120 deg C
Type      :      Round Bore Miniature Extra Small
Bore Diameter      :      25.4 mm
Outside Diameter      :      50.8 mm
Number of Rows      :      1
Width      :      12.7 mm
Load Capacity      :      7750 N


  • pdf